19-inch rim · tyre size comparison
285/35 R19 vs 295/30 R19
295/30 R19 is 22.5 mm (0.89 in) shorter than 285/35 R19, a -3.3% difference in overall diameter. That is just outside the ±3% limit commonly used to screen a tire size change, so expect a noticeable speedometer error; it is a nominal calculation, not a fitment approval.
- Diameter difference
- -22.5 mm
- -0.89 in · -3.3%
- Indicated 70 mph
- 67.7 mph
- Actual speed on 295/30 R19, if the speedometer was accurate on 285/35 R19.
- Sidewall height
- -11.25 mm
- 99.75 mm to 88.5 mm.
Dimensions side by side
| Measurement | 285/35 R19 | 295/30 R19 | Difference |
|---|---|---|---|
| Overall diameter | 682.1 mm26.85 in | 659.6 mm25.97 in | -22.5 mm (-3.3%)-0.89 in |
| Section width | 285 mm11.22 in | 295 mm11.61 in | +10 mm+0.39 in |
| Sidewall height | 99.75 mm3.93 in | 88.5 mm3.48 in | -11.25 mm-0.44 in |
| Circumference | 2,142.88 mm84.37 in | 2,072.19 mm81.58 in | -70.69 mm-2.78 in |
| Rim diameter | 482.6 mm19 in | 482.6 mm19 in | 0 mm0 in |
| Revolutions per mile | 751.02 | 776.64 | +25.62 |
| Revolutions per km | 466.66 | 482.58 | +15.92 |
Calculated from the nominal size codes, without load or tread wear. Real tyres vary by model, rim width and pressure, so the exact tyre's published dimensions take priority.
Speedometer with 295/30 R19
If the speedometer was accurate on 285/35 R19, fitting 295/30 R19 means the car is travelling 3.3% slower than it shows, and the odometer over-records distance by about the same amount.
| Speedometer shows | Actual on 295/30 R19 | Difference |
|---|---|---|
| 30 mph | 29.01 mph | -0.99 mph |
| 50 mph | 48.35 mph | -1.65 mph |
| 60 mph | 58.02 mph | -1.98 mph |
| 70 mph | 67.69 mph | -2.31 mph |
| 50 km/h | 48.35 km/h | -1.65 km/h |
| 100 km/h | 96.7 km/h | -3.3 km/h |
UN ECE Regulation 39, used in the UK and EU, does not allow a speedometer to show less than the true speed, so many read slightly high from the factory. A shorter tyre adds to it. Calibration varies by car; these figures are the tyre-size effect only.
What changes from 285/35 R19 to 295/30 R19
Wheels
Both fit 19-inch wheels. Our rim-width starting estimate is 9 to 10 inches for 285/35 R19 and 9.5 to 10.5 inches for 295/30 R19, so a 9.5 to 10-inch wheel sits in both ranges. The exact tyre's approved rim range takes priority.
Sidewall and ride comfort
295/30 R19 has 11.25 mm less sidewall (88.5 vs 99.75 mm). A shorter sidewall usually sharpens steering response, but rides a little firmer and leaves the rim more exposed to potholes and kerbs.
Contact width
295/30 R19 is 10 mm wider in nominal section width (3.5%). A wider tyre usually puts a wider, shorter contact patch on the road, which can help dry grip, but it may follow ruts more, clear standing water less readily and add some rolling resistance.
Wheel well clearance
Ride height changes by about -11.3 mm, and the top of the tyre moves the same distance away from the arch. On the same wheel width and offset, each sidewall moves about 5 mm further out towards the arch lip and further in towards the suspension. Check clearance at full steering lock and full suspension compression, especially on a lowered car.
Gearing
The effective final drive changes by +3.41%: 3,000 rpm at a given road speed becomes about 3,100 rpm. Gearing gets noticeably shorter, so acceleration in each gear sharpens and cruising revs rise.
ABS, stability control and AWD
These systems compare wheel speeds. Fit the same size on both ends of an axle; with a 3.3% diameter gap, never mix 285/35 R19 and 295/30 R19 on an AWD car, and follow the car maker's rolling-circumference limits, which can be much tighter than 3%.
General tendencies from the nominal numbers, not a test of any tyre. Load index, speed rating, tyre construction and the car's approved sizes matter more than these rules of thumb.
Explained in our guides
- Plus-sizing wheels: tyre diameter and speedometer changesWork through a 17 to 18 inch wheel change, compare tyre diameters and speedometer effects, and understand why a 3% rule cannot approve fitment.
- Staggered vs square wheels: tyres, rotation and AWDCompare square and staggered wheel setups, calculate front-to-rear tyre diameter, and understand rotation limits and all-wheel-drive requirements.
- How to read a tyre size, load index and sidewall markingsDecode tyre width, aspect ratio, rim diameter, load and speed markings, then calculate sidewall height and diameter using a 225/45 R17 example.
Cars in our guides using these sizes
Factory trims and popular community setups from our fitment guides. A popular setup is not a factory approval; each guide explains its trims, axles and clearance limits.
285/35 R19
- BMW 5 Series / M5 E60/E61 (2003–2010)Factory trim
- BMW 5 Series F10/F11 (2010–2017)Popular setup
- BMW M3 G80 (2021–present)Factory trim
- BMW M4 G82 (2021–present)Factory trim
- Chevrolet Camaro 5th gen (2010–2015)Popular setup
- Chevrolet Camaro 6th gen (2016–2024)Popular setup
- Chevrolet Corvette C7 (2014–2019)Factory trim
- Ford Mustang S550 (2015–2023)Popular setup
- Ford Mustang S650 (2024–present)Popular setup
- Infiniti Q60 CV37 (2017–2022)Popular setup
- Nissan 370Z Z34 (2009–2020)Factory trim
- Nissan Z RZ34 (2023–present)Factory and popular setup
- Porsche 718 Cayman 982 (2016–present)Popular setup
- Porsche 911 991 (2012–2019)Factory trim
295/30 R19
- Porsche 911 997 (2004–2012)Factory trim
More comparisons
285/35 R19 compared
Questions
Can I use 295/30 R19 instead of 285/35 R19?
Both fit 19-inch wheels. The diameter difference is -3.3%, just outside the ±3% screening limit, so most fitters would treat it as a different size class rather than a direct replacement. That does not approve fitment: check the car maker's approved sizes, load index, speed rating, rim width and clearance first.
How much bigger is 295/30 R19 than 285/35 R19?
Overall diameter is 22.5 mm (0.89 in) smaller: 659.6 vs 682.1 mm. Section width is 10 mm wider, and the sidewall is 11.25 mm shorter. These are nominal figures; real tyres vary by model and rim width.
Will 295/30 R19 change my speedometer reading?
Yes, by 3.3%. If the speedometer was accurate on 285/35 R19, an indicated 60 mph would be about 58 mph on 295/30 R19, and an indicated 100 km/h about 96.7 km/h. You would be going slower than the speedometer shows.
Which is better, 285/35 R19 or 295/30 R19?
Neither in general. 285/35 R19 has the taller sidewall, which usually rides more comfortably; 295/30 R19 usually steers more sharply. 295/30 R19 is wider, which can help dry grip; the narrower size is usually better in standing water and snow. The size listed for your car's trim, on its placard or in the handbook, is the safe default.
Check the exact tyre
Size codes give nominal dimensions. Before buying, confirm the size is approved for your car and check the exact tyre's load and speed ratings and published dimensions.