2014–2019 · coupe / convertible

Chevrolet Corvette C7 wheel fitment

C7 wheel fitment splits between the narrow Stingray body and the wider Grand Sport, Z06 and ZR1. Owners commonly retain staggered diameters, with smaller track wheels providing more tyre choice.

5x120.65 bolt pattern · 70.3 mm centre bore · Stock wheels: 18 × 8.5, 19 × 10, 19 × 8.5, 20 × 10, 20 × 12, 19 × 10.5 inch · Stock tyres: 245/40 R18, 285/35 R19, 245/35 R19, 285/30 R20, 285/30 R19, 335/25 R20

Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs

Quick specs

Chevrolet Corvette C7 hub and fastener specifications
SpecificationValue
Bolt pattern
Stock tyre sizes
Centre bore70.3 mm
Fastener and threadWheel nut, M12x1.5
Tightening torque140 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
TrimAxleWheelTyre
Stingray, standardFront18 × 8.5 inch, ET56245/40 R18
Stingray, standardRear19 × 10 inch, ET79285/35 R19
Stingray Z51Front19 × 8.5 inch, ET56245/35 R19
Stingray Z51Rear20 × 10 inch, ET79285/30 R20
Grand Sport / Z06Front19 × 10 inch, ET43285/30 R19
Grand Sport / Z06Rear20 × 12 inch, ET59335/25 R20
ZR1Front19 × 10.5 inch, ET42285/30 R19
ZR1Rear20 × 12 inch, ET59335/25 R20

Read these before choosing wheels for the Corvette: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

Stingray street and track

Front
18 × 10 inch, ET58 · 275/35 R18
Rear
19 × 11 inch, ET78 · 305/30 R19

Apex lists this staggered combination as a direct fit for the narrowbody C7. Confirm the chosen wheel's brake compatibility.

Widebody with factory tyre sizes

Front
19 × 10.5 inch, ET36 · 285/30 R19
Rear
20 × 12.5 inch, ET55 · 335/25 R20

Apex's direct-fit option for Grand Sport, Z06 and ZR1 bodywork. These offsets are not a Stingray fitment.

Widebody 18/19-inch setup

Front
18 × 10 inch, ET32 · 275/35 R18
Rear
19 × 12.5 inch, ET55 · 325/30 R19

Apex lists this combination for the widebody chassis without suspension or alignment changes. Use the wheel model approved for the car's iron or carbon-ceramic brakes.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

  • C7 uses 5x120.65, also called 5x4.75 inches. C8 5x120 wheels are a different bolt pattern and should not be treated as interchangeable.
  • Narrowbody and widebody offsets differ substantially. A shared bolt pattern does not make Grand Sport or Z06 wheels fit a Stingray.
  • Check the exact wheel design against the brake package, especially carbon-ceramic brakes, before downsizing.
  • Retain an appropriate front-to-rear tyre diameter relationship. Some equal-diameter track tyre combinations interfere with the stability and traction systems; they are not included here.
  • Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Corvette. Try the wheels, colour and stance before you spend on parts.

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

Questions

What is the C7 Corvette bolt pattern?

It is 5x120.65, equivalent to 5x4.75 inches, with a 70.3 mm centre bore.

Will C8 wheels fit a C7 Corvette?

They are not a direct replacement. The C8 uses a different bolt pattern, centre bore and stud thread.

Do Z06 wheels fit a Stingray?

Do not assume they do. The Z06 has wider bodywork and different factory wheel widths and offsets; use a narrowbody-specific fitment.

What is the C7 wheel nut torque?

The Chevrolet owner's manual specifies 140 Nm for the factory wheel nuts.

What size tyres does the Chevrolet Corvette C7 have?

Factory tyre (tire) sizes for the 2014–2019 Chevrolet Corvette C7 are 245/40 R18, 285/35 R19, 245/35 R19, 285/30 R20, 285/30 R19 and 335/25 R20, depending on trim, with wider rears on staggered setups. Your tyre placard shows the size for your car.

What wheel size does the Chevrolet Corvette C7 use?

Factory wheels are 18 × 8.5 inch, 19 × 10 inch, 19 × 8.5 inch, 20 × 10 inch, 20 × 12 inch and 19 × 10.5 inch, depending on trim. The stock table lists the offset for each.

What is the Chevrolet Corvette C7 centre bore?

70.3 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars