19-inch square road setup
- Front and rear
- 19 × 10 inch, ET12 · 275/35 R19
Apex direct fitment listed as xDrive-compatible. Confirm the specific wheel design clears the fitted brake package.
2021–present · coupe
BMW M4 G82 wheel fitment
The G82 M4 uses staggered factory wheel widths and diameters. Owners also use square 19-inch sets or wider 19/20-inch combinations, with xDrive compatibility checked separately from arch clearance.
5x112 bolt pattern · 66.6 mm centre bore · Stock wheels: 18 × 9.5, 19 × 10.5, 19 × 9.5, 20 × 10.5 inch · Stock tyres: 275/40 R18, 285/35 R19, 275/35 R19, 285/30 R20
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.6 mm |
| Fastener and thread | Wheel bolt, M14x1.25 |
| Tightening torque | 140 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| M4, 18/19-inch Style 824M package, early base models | Front | 18 × 9.5 inch, ET20 | 275/40 R18 |
| M4, 18/19-inch Style 824M package, early base models | Rear | 19 × 10.5 inch, ET20 | 285/35 R19 |
| M4 / Competition / xDrive, 19/20-inch Style 825M / 826M package | Front | 19 × 9.5 inch, ET20 | 275/35 R19 |
| M4 / Competition / xDrive, 19/20-inch Style 825M / 826M package | Rear | 20 × 10.5 inch, ET20 | 285/30 R20 |
Explained in our guides
Read these before choosing wheels for the M4: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Staggered vs square wheels: tyres, rotation and AWDCompare square and staggered wheel setups, calculate front-to-rear tyre diameter, and understand rotation limits and all-wheel-drive requirements.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
19/20-inch wider road setup
- Front
- 19 × 10 inch, ET12 · 275/35 R19
- Rear
- 20 × 11 inch, ET18 · 285/30 R20
Apex lists this factory-tyre pairing as xDrive-compatible. Check the front liner at full lock, especially with wide tyre shoulders or lowered suspension.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Factory BMW wheels use conical-seat bolts. Match the seat and thread engagement to the wheel; spacers require suitably longer bolts or an appropriate stud conversion.
- Wheel suppliers commonly specify 66.6 mm, while H&R lists 66.5 mm for the corresponding centring hardware. Use the supplier's explicit chassis application when selecting wheels or hub rings.
- The G82 uses 5x112, so F82 M4 wheels with a 5x120 pattern do not bolt straight on.
- Factory carbon-ceramic brakes need an approved 19-inch or larger wheel. Steel-brake 18-inch clearance depends on barrel and spoke design.
- A rear-wheel-drive tyre combination is not automatically suitable for xDrive. Keep to a documented pairing and matched tyre model.
- The factory table covers the main production packages. Limited editions and accessory wheels should be identified by part number.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the M4. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the M4, 18/19-inch Style 824M package, early base models front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the G82 M4 bolt pattern?
5x112, with a nominal 66.6 mm centre bore and M14x1.25 wheel bolts.
Will F82 wheels fit a G82 M4?
No direct fit is possible: F82 wheels use 5x120 and the G82 uses 5x112.
Can the M4 xDrive use the same wheel size all round?
Yes. Apex documents a square 19x10 ET12 package with 275/35 R19 tyres as xDrive-compatible.
What tyre sizes are standard on G82 19/20-inch wheels?
275/35 R19 front and 285/30 R20 rear, on 19x9.5 ET20 and 20x10.5 ET20 wheels.
What is the G82 M4 wheel bolt torque?
140 Nm for factory M14x1.25 bolts.
What is the BMW M4 G82 centre bore?
66.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- BMW M: M3 and M4 factory wheel styles, dimensions and offsets
- BMW: G80 / G82 / G83 price and specification guide, 2023
- H&R: 2024–25 application catalogue, G80 / G82 / G87 mounting hardware
- BimmerWorld: BMW original bolt thread and torque reference
- FMB Wheels: G82 factory packages, mounting hardware and torque
- Apex: BMW G82 G83 M4 fitment guide
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from BMW or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.