19-inch square road setup
- Front and rear
- 19 × 10 inch, ET12 · 275/35 R19
Apex lists this as a direct fit and xDrive-compatible with its specified wheel designs. The identical tyres allow front-to-rear rotation.
2021–present · saloon
BMW M3 G80 wheel fitment
The G80 M3 uses different wheel diameters front and rear in its factory packages. Square 19-inch wheels are also documented, but xDrive cars need a tyre pairing checked for that drivetrain.
5x112 bolt pattern · 66.6 mm centre bore · Stock wheels: 18 × 9.5, 19 × 10.5, 19 × 9.5, 20 × 10.5 inch · Stock tyres: 275/40 R18, 285/35 R19, 275/35 R19, 285/30 R20
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.6 mm |
| Fastener and thread | Wheel bolt, M14x1.25 |
| Tightening torque | 140 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| M3, 18/19-inch Style 824M package | Front | 18 × 9.5 inch, ET20 | 275/40 R18 |
| M3, 18/19-inch Style 824M package | Rear | 19 × 10.5 inch, ET20 | 285/35 R19 |
| M3 Competition / xDrive, 19/20-inch Style 825M / 826M package | Front | 19 × 9.5 inch, ET20 | 275/35 R19 |
| M3 Competition / xDrive, 19/20-inch Style 825M / 826M package | Rear | 20 × 10.5 inch, ET20 | 285/30 R20 |
Explained in our guides
Read these before choosing wheels for the M3: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Staggered vs square wheels: tyres, rotation and AWDCompare square and staggered wheel setups, calculate front-to-rear tyre diameter, and understand rotation limits and all-wheel-drive requirements.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
19/20-inch factory-tyre upgrade
- Front
- 19 × 10 inch, ET12 · 275/35 R19
- Rear
- 20 × 11 inch, ET18 · 285/30 R20
Documented Apex xDrive-compatible combination using factory tyre sizes. Wide-shouldered tyres can touch the front liner at full lock; check lowered cars carefully.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Factory BMW wheels use conical-seat bolts. Match the seat and thread engagement to the wheel; spacers require suitably longer bolts or an appropriate stud conversion.
- Wheel suppliers commonly specify 66.6 mm, while H&R lists 66.5 mm for the corresponding centring hardware. Use the supplier's explicit chassis application when selecting wheels or hub rings.
- The G80 is 5x112. Earlier F80 and F82 wheels are 5x120 and are not a direct fit.
- Carbon-ceramic brakes need a compatible 19-inch or larger wheel. An 18-inch wheel must be explicitly cleared for the steel brake package.
- Apex distinguishes xDrive-compatible pairings from rear-wheel-drive-only combinations. Do not substitute a wider rear tyre without checking its rolling circumference.
- Factory equipment varies by market and model year. Both factory wheel packages listed use ET20 at each axle.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the M3. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the M3, 18/19-inch Style 824M package front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the BMW M3 G80 bolt pattern?
5x112, with a nominal 66.6 mm wheel centre bore and M14x1.25 bolts.
Can a G80 M3 xDrive run square wheels?
Apex documents 19x10 ET12 with 275/35 R19 tyres all round as xDrive-compatible. Use the complete documented tyre and wheel combination.
Will 18-inch wheels clear G80 carbon-ceramic brakes?
No. The factory carbon-ceramic package needs a compatible 19-inch or larger wheel.
What are the G80 Competition factory wheel offsets?
ET20 front and rear. The main 19/20-inch package is 19x9.5 front and 20x10.5 rear.
What is the G80 M3 wheel bolt torque?
140 Nm for the original M14x1.25 bolts.
What size tyres does the BMW M3 G80 have?
Factory tyre (tire) sizes for the 2021–present BMW M3 G80 are 275/40 R18, 285/35 R19, 275/35 R19 and 285/30 R20, depending on trim, with wider rears on staggered setups. Your tyre placard shows the size for your car.
What wheel size does the BMW M3 G80 use?
Factory wheels are 18 × 9.5 inch, 19 × 10.5 inch, 19 × 9.5 inch and 20 × 10.5 inch, depending on trim. The stock table lists the offset for each.
What is the BMW M3 G80 centre bore?
66.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- BMW M: M3 and M4 factory wheel styles, dimensions and offsets
- BMW: G80 / G82 / G83 price and specification guide, 2023
- H&R: 2024–25 application catalogue, G80 / G82 / G87 mounting hardware
- BimmerWorld: BMW original bolt thread and torque reference
- FMB Wheels: G80 mounting hardware and torque
- Apex: BMW G80 M3 fitment guide
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from BMW or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.