2009–2020 · coupe / roadster
The 370Z has staggered factory wheels, ranging from 18-inch base equipment to wider Nismo 19-inch sets. Road and track builds commonly increase front width while retaining wider rear tyres.
5x114.3 bolt pattern · 66.1 mm centre bore · Stock wheels: 18 × 8, 18 × 9, 19 × 9, 19 × 10, 19 × 9.5, 19 × 10.5 inch · Stock tyres: 225/50 R18, 245/45 R18, 245/40 R19, 275/35 R19, 285/35 R19
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.1 mm |
| Fastener and thread | Wheel nut, M12x1.25 |
| Tightening torque | 108 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| Base, 18-inch package | Front | 18 × 8 inch, ET43 | 225/50 R18 |
| Base, 18-inch package | Rear | 18 × 9 inch, ET15 | 245/45 R18 |
| Sport, forged 19-inch package | Front | 19 × 9 inch, ET47 | 245/40 R19 |
| Sport, forged 19-inch package | Rear | 19 × 10 inch, ET30 | 275/35 R19 |
| Nismo | Front | 19 × 9.5 inch, ET40 | 245/40 R19 |
| Nismo | Rear | 19 × 10.5 inch, ET23 | 285/35 R19 |
Read these before choosing wheels for the 370Z: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Apex lists this as a popular street and track fitment. Wider-running tyre compounds can require additional front negative camber. Its brake-clearance confirmation applies to the listed Apex designs.
A documented Apex pairing, usually compatible with street tyres. Check front camber and arch clearance if lowered or using tyres with broad shoulders.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the 370Z. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the Base, 18-inch package front size. Choose your own trim or axle in the calculator if it differs.
5x114.3, with a 66.1 mm centre bore and M12x1.25 wheel nuts.
Yes. Approved designs such as the Apex fitments listed here clear the factory brakes; diameter alone is not a clearance guarantee.
19x9.5 ET40 front and 19x10.5 ET23 rear, with 245/40 R19 and 285/35 R19 tyres.
Factory tyre (tire) sizes for the 2009–2020 Nissan 370Z Z34 are 225/50 R18, 245/45 R18, 245/40 R19, 275/35 R19 and 285/35 R19, depending on trim, with wider rears on staggered setups. Your tyre placard shows the size for your car.
Factory wheels are 18 × 8 inch, 18 × 9 inch, 19 × 9 inch, 19 × 10 inch, 19 × 9.5 inch and 19 × 10.5 inch, depending on trim. The stock table lists the offset for each.
66.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
108 Nm (about 80 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Nissan or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.