2012–2019 · coupé, cabriolet and Targa
The 991 combines several rear body widths and two wheel-fastening systems. The stock entries distinguish early and facelift Carrera packages; the aftermarket examples below are specifically documented for narrow-body 991.1 Carrera and Carrera S models.
5x130 bolt pattern · 71.6 mm centre bore · Stock wheels: 19 × 8.5, 19 × 11, 20 × 8.5, 20 × 11, 19 × 11.5, 20 × 11.5 inch · Stock tyres: 235/40 R19, 285/35 R19, 245/35 R20, 295/30 R20, 295/35 R19, 305/30 R20
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 71.6 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 160 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| 991.1 Carrera, 19-inch | Front | 19 × 8.5 inch, ET54 | 235/40 R19 |
| 991.1 Carrera, 19-inch | Rear | 19 × 11 inch, ET69 | 285/35 R19 |
| 991.1 Carrera S / optional Carrera, 20-inch | Front | 20 × 8.5 inch, ET51 | 245/35 R20 |
| 991.1 Carrera S / optional Carrera, 20-inch | Rear | 20 × 11 inch, ET70 | 295/30 R20 |
| 991.2 Carrera, 19-inch summer | Front | 19 × 8.5 inch, ET50 | 235/40 R19 |
| 991.2 Carrera, 19-inch summer | Rear | 19 × 11.5 inch, ET76 | 295/35 R19 |
| 991.2 Carrera S / Carrera T, 20-inch summer | Front | 20 × 8.5 inch, ET49 | 245/35 R20 |
| 991.2 Carrera S / Carrera T, 20-inch summer | Rear | 20 × 11.5 inch, ET76 | 305/30 R20 |
| 991.2 Carrera 4S / Targa 4S, 20-inch summer | Front | 20 × 8.5 inch, ET49 | 245/35 R20 |
| 991.2 Carrera 4S / Targa 4S, 20-inch summer | Rear | 20 × 11.5 inch, ET56 | 305/30 R20 |
Read these before choosing wheels for the 911: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Apex lists this for the narrow-body 991.1 Carrera family. Front strut-mount adjustment may be needed; optional 5 or 7 mm rear spacers bring the rear wheels further out.
Apex lists this wheel and tyre combination as a direct fit for the covered 991.1 Carrera models. Brake clearance is specific to the wheel design.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the 911. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the 991.1 Carrera, 19-inch front size. Choose your own trim or axle in the calculator if it differs.
Five-bolt 991 models use 5x130, a 71.6 mm centre bore and M14x1.5 bolts. This does not describe centre-lock cars.
Not at the rear. For example, the listed 991.2 20-inch rear wheel is ET76 on a Carrera S and ET56 on a Carrera 4S.
Apex documents 19x9 ET50 front and 19x11 ET60 rear for narrow-body 991.1 Carrera models. Confirm brake clearance and do not assume this applies to every PCCB or rear-steering car.
Factory tyre (tire) sizes for the 2012–2019 Porsche 911 991 are 235/40 R19, 285/35 R19, 245/35 R20, 295/30 R20, 295/35 R19 and 305/30 R20, depending on trim, with wider rears on staggered setups. Your tyre placard shows the size for your car.
Factory wheels are 19 × 8.5 inch, 19 × 11 inch, 20 × 8.5 inch, 20 × 11 inch, 19 × 11.5 inch and 20 × 11.5 inch, depending on trim. The stock table lists the offset for each.
71.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
160 Nm (about 118 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Porsche or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.