2009–2023 · SUV

Toyota Land Cruiser Prado 150 Series wheel fitment

The Prado 150 uses six-stud wheels, with narrower GX wheels and wider GXL, VX and Kakadu packages in Australia. A 17-inch wheel with a modest tyre increase is a common touring choice.

6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 17 × 6.5, 17 × 7.5, 18 × 7.5, 19 × 7.5 inch · Stock tyres: 245/70R17, 265/65R17, 265/60R18, 265/55R19

Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs

Quick specs

Toyota Land Cruiser Prado 150 Series hub and fastener specifications
Specification	Value
Bolt pattern	6x139.7
Stock tyre sizes	245/70R17 265/65R17 265/60R18 265/55R19
Centre bore	106.1 mm
Fastener and thread	Wheel nut, M12x1.5
Tightening torque	Confirm in your handbook

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
GX narrow 17-inch package	Front and rear	17 × 6.5 inch, ET15	245/70R17
GXL 17-inch package	Front and rear	17 × 7.5 inch, ET25	265/65R17
VX / Kakadu 18-inch package	Front and rear	18 × 7.5 inch, ET25	265/60R18
19-inch package, selected later markets	Front and rear	19 × 7.5 inch, ET25	265/55R19

Explained in our guides

Read these before choosing wheels for the Land Cruiser Prado: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

Factory-wheel touring

Front and rear: 17 × 7.5 inch, ET25 · 265/70R17

A common Prado owner upgrade on the standard wide 17-inch alloys. Reports include unlifted vehicles; check actual tyre clearance at full lock and compression.

Wider 17-inch all-terrain

Front and rear: 17 × 9 inch, ET12 · 265/70R17

CNC Wheels' specified Prado package. Check flare coverage and clearance on the particular suspension and tyre combination before purchase.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

Toyota specifies 103 Nm for aluminium wheels and 112 Nm for steel wheels. A single torque value is omitted because it would hide that distinction.
Factory alloy and aftermarket wheel nuts may have different seats. Match the nuts to the wheel.
GX wheels are narrower and have a different offset from the usual GXL alloy. Do not treat every factory 17-inch wheel as identical.
Larger 285/70R17 packages can require front mudflap and plastic trimming; a lift alone does not resolve every clearance issue.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Land Cruiser Prado. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the GX narrow 17-inch package front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Questions

What is the Prado 150 bolt pattern?

It is 6x139.7 with a 106.1 mm centre bore and M12x1.5 wheel nuts.

What torque do Prado wheel nuts need?

Toyota specifies 103 Nm for aluminium wheels and 112 Nm for steel wheels.

Can I fit 265/70R17 on standard Prado wheels?

Owners commonly use this size on the 17x7.5 ET25 alloys. Check the tyre's approved rim width and clearance on the actual vehicle.

Are GX and GXL 17-inch wheels the same?

No. The listed GX package is 17x6.5 ET15, while the GXL alloy is 17x7.5 ET25.

What size tyres does the Toyota Land Cruiser Prado 150 Series have?

Factory tyre (tire) sizes for the 2009–2023 Toyota Land Cruiser Prado 150 Series are 245/70R17, 265/65R17, 265/60R18 and 265/55R19, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Toyota Land Cruiser Prado 150 Series use?

Factory wheels are 17 × 6.5 inch, 17 × 7.5 inch, 18 × 7.5 inch and 19 × 7.5 inch, depending on trim. The stock table lists the offset for each.

What is the Toyota Land Cruiser Prado 150 Series centre bore?

106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.