Mildly wider daily setup
- Front and rear
- 18 × 8.5 inch, ET35 · 225/40 R18
A commonly discussed and owner-used hatchback wheel specification. Check clearance after lowering and confirm the tyre manufacturer’s permitted rim width.
2018–present · saloon / hatchback
Toyota Corolla E210, North American non-GR wheel fitment
The E210 Corolla community commonly uses 18-inch wheels with modest lowering. This guide covers North American non-GR models with 5x100 hubs; European and other regional versions can have a different bolt pattern.
5x100 bolt pattern · 54.1 mm centre bore · Stock wheels: 15 × 6.5, 16 × 7, 18 × 8 inch · Stock tyres: 195/65 R15, 205/55 R16, 225/40 R18
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 54.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | 103 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| US L / early Hybrid LE, 15-inch package | Front and rear | 15 × 6.5 inch, ET40 | 195/65 R15 |
| US LE saloon / SE hatchback, 16-inch package | Front and rear | 16 × 7 inch, ET40 | 205/55 R16 |
| US SE saloon / XSE, 18-inch package | Front and rear | 18 × 8 inch, ET40 | 225/40 R18 |
Explained in our guides
Read these before choosing wheels for the Corolla: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Lowered nine-inch setup
- Front and rear
- 18 × 9 inch, ET42 · 225/40 R18
An owner reports this on springs lowered around 1.2 inches, with standard arches and no rubbing. The tyre is narrow for the wheel, so verify the exact tyre’s approved rim range; other tyre shapes or ride heights may rub.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- The 5x100 and 54.1 mm figures are specific to the North American non-GR application. European E210 versions can use 5x114.3 and 60.1 mm. These specifications must not be mixed.
- The hatchback appeared in 2018 for model year 2019; the North American E210 saloon arrived for model year 2020. A 2019 US saloon is the preceding generation.
- GR Corolla and Corolla Cross are excluded. A Corolla badge alone does not identify the hub specification.
- Factory alloy-wheel shank nuts may not suit aftermarket conical seats. Use the correct nuts for the chosen wheels.
- The stock rows describe common early North American packages; later hybrid and regional trim equipment varies.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Corolla. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the US L / early Hybrid LE, 15-inch package front size. Choose your own trim or axle in the calculator if it differs.
Questions
Does every E210 Corolla use 5x100 wheels?
No. North American non-GR models use 5x100, while European and other regional versions can use 5x114.3. Verify the market and vehicle before ordering.
What is the centre bore of a US E210 Corolla?
It is 54.1 mm on the non-GR application covered here.
Will GR Corolla wheels fit a regular US Corolla?
They are not a direct fit. The GR Corolla uses a different bolt pattern.
What is the wheel nut torque?
Toyota specifies 103 Nm for the North American Corolla factory wheel installation.
What is the Toyota Corolla E210, North American non-GR bolt pattern?
5x100, with a 54.1 mm centre bore and M12x1.5 wheel nuts. Check the exact model year and market in the guide.
What size tyres does the Toyota Corolla E210, North American non-GR have?
Factory tyre (tire) sizes for the 2018–present Toyota Corolla E210, North American non-GR are 195/65 R15, 205/55 R16 and 225/40 R18, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Toyota Corolla E210, North American non-GR use?
Factory wheels are 15 × 6.5 inch, 16 × 7 inch and 18 × 8 inch, depending on trim. The stock table lists the offset for each.
Specs checked against
- Toyota: 2020 Corolla owner manual, wheels and tyres
- Element Wheels: North American Corolla mounting data
- Avansys: 2020 Corolla hub, hardware and torque
- TireWheelGuide: 2020 Corolla market-specific factory fitments
- Corolla Hatchback owners: 18-inch wheel and lowering examples
- Corolla Hatchback owners: common aftermarket widths and offsets
- Road Ready Wheels: original-equivalent Corolla 15-inch steel dimensions
- Toyota Parts Deal: genuine 15x6.5 Corolla wheel
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.