TRD wheels with standard-size all-terrains
- Front and rear
- 17 × 7 inch, ET4 · 265/70 R17
Common Toyota TRD wheel upgrade using the original tyre diameter. Confirm the exact TRD wheel part number and steering clearance.
2010–2024 · SUV
Toyota 4Runner 5th gen (N280) wheel fitment
The N280 4Runner has a large community using 17-inch wheels and all-terrain tyres. Factory TRD wheels provide a modest change in stance, while wider 33-inch combinations often require clearance work as well as a lift.
6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 17 × 7, 17 × 7.5, 20 × 7 inch · Stock tyres: 265/70 R17, 245/60 R20
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 106.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | Confirm in your handbook |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| SR5 | Front and rear | 17 × 7 inch, ET15 | 265/70 R17 |
| Trail / TRD Off-Road | Front and rear | 17 × 7.5 inch, ET15 | 265/70 R17 |
| TRD Pro, ET4 wheel design | Front and rear | 17 × 7 inch, ET4 | 265/70 R17 |
| Limited | Front and rear | 20 × 7 inch, ET15 | 245/60 R20 |
Explained in our guides
Read these before choosing wheels for the 4Runner: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Lifted truck wheel fitment: backspacing, 33s, 35s and trimmingPlan larger truck tyres around lift-kit requirements, backspacing, steering and articulation. Compare 33 and 35 inch tyres without assuming a lift guarantees clearance.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
33-inch trail build
- Front and rear
- 17 × 8.5 inch, ET0 · 285/70 R17
Documented on Relations Race Wheels. Allow for a suspension lift, front liner and mudflap changes, and possible body-mount clearance work.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- There is no generation-wide torque value in this file. The 2010 manual gives 110 Nm, while later manuals specify 103 Nm for aluminium wheels and 112 Nm for steel wheels. Toyota TRD alloy instructions specify 103 Nm. Follow the manual and instructions applicable to the fitted wheel.
- Some databases give 113 or 131 Nm indiscriminately; the Toyota year-specific instructions take precedence.
- The TRD Pro stock row refers to the documented ET4 design, not every later TRD-branded wheel.
- Match the wheel nut seat to the wheel. A nominally correct six-stud wheel may still have the wrong bore or nut seat.
- Lift height does not remove the need to test tyre clearance through full suspension travel.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the 4Runner. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the SR5 front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the fifth-generation 4Runner bolt pattern?
It uses 6x139.7, a 106.1 mm centre bore and M12x1.5 wheel nuts.
Will 285/70 R17 tyres fit without rubbing?
Rubbing depends on offset, alignment and suspension travel. A typical 17x8.5 ET0 build may need liners, mudflaps and body-mount clearance addressed.
Can a Limited use 17-inch wheels?
Suitable 4Runner-specific 17-inch wheels are available. Confirm brake clearance and use a tyre diameter appropriate to the vehicle.
What is the correct wheel nut torque?
Check the model-year manual. Later factory alloy installations and Toyota TRD instructions specify 103 Nm; early manuals and steel wheels have different values.
What size tyres does the Toyota 4Runner 5th gen (N280) have?
Factory tyre (tire) sizes for the 2010–2024 Toyota 4Runner 5th gen (N280) are 265/70 R17 and 245/60 R20, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Toyota 4Runner 5th gen (N280) use?
Factory wheels are 17 × 7 inch, 17 × 7.5 inch and 20 × 7 inch, depending on trim. The stock table lists the offset for each.
What is the Toyota 4Runner 5th gen (N280) centre bore?
106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- TireWheelGuide: 2020 factory dimensions and hardware
- Element Wheels: 4Runner generation-specific hubs
- Toyota: 2010 4Runner manual specification page
- Toyota: TRD alloy wheel installation
- CheckFitment: model-year owner-manual torque comparison
- Toyota: alloy wheel hub specification
- Trail4Runner: RR5-S wheel build and clearance
- Trail4Runner: documented wheel and tyre combinations
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.