1996–2001 · saloon
The JZX100 Chaser commonly uses staggered 17- or 18-inch wheels for street and drift builds. The Tourer V already has wider rear wheels from the factory, while lowered cars often need attention to rear arch lips.
5x114.3 bolt pattern · 60.1 mm centre bore · Stock wheels: 15 × 6, 16 × 6.5, 16 × 7.5 inch · Stock tyres: 195/65 R15, 205/55 R16, 225/50 R16
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 60.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | Confirm in your handbook |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| 2.5 Avante, 15-inch package | Front and rear | 15 × 6 inch, ET50 | 195/65 R15 |
| Tourer V | Front | 16 × 6.5 inch, ET50 | 205/55 R16 |
| Tourer V | Rear | 16 × 7.5 inch, ET55 | 225/50 R16 |
Read these before choosing wheels for the Chaser: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
A Japanese owner fitment register documents these BBS LM sizes on a Tourer S. Check the actual brake package on a Tourer V before choosing the same wheel.
The owner register documents a Tourer V on BBS LM wheels with no rolled arches and clearance for Supra calipers. This is wheel-design specific; verify at full compression on a lowered car.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the Chaser. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the 2.5 Avante, 15-inch package front size. Choose your own trim or axle in the calculator if it differs.
5x114.3, with a 60.1 mm centre bore and M12x1.5 wheel nuts.
Yes. They are 16x6.5 ET50 front and 16x7.5 ET55 rear, with 205/55 R16 and 225/50 R16 tyres.
Yes. Owners document 18x8 ET35 front and 18x9 ET35 rear with 235/40 R18 and 255/35 R18 tyres.
Yes. Spoke clearance must be checked against the actual calipers. The documented BBS LM example clears Supra calipers, but another design in the same size may not.
Factory tyre (tire) sizes for the 1996–2001 Toyota Chaser JZX100 are 195/65 R15, 205/55 R16 and 225/50 R16, depending on trim, with wider rears on staggered setups. Your tyre placard shows the size for your car.
Factory wheels are 15 × 6 inch, 16 × 6.5 inch and 16 × 7.5 inch, depending on trim. The stock table lists the offset for each.
60.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.
2003–2009 · 6x139.7
2010–2024 · 6x139.7
2012–2018 · 5x114.3
2018–present · 5x100
1983–1987 · 4x114.3
2006–2022 · 6x139.7