Factory wheels with taller all-terrains
- Front and rear
- 17 × 7.5 inch, ET30 · 265/70 R17
Documented on standard suspension. Aggressive tread shoulders can rub, so check the exact tyre.
2003–2009 · SUV
Toyota 4Runner 4th gen / N210 wheel fitment
Fourth-generation 4Runners commonly retain 17-inch wheels for taller trail tyres. More tyre and a lower offset can both reduce clearance when steering, even on a lifted vehicle.
6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 16 × 7, 17 × 7.5, 18 × 7.5 inch · Stock tyres: 265/70 R16, 265/65 R17, 265/60 R18
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 106.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | 110 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| SR5, 16-inch package | Front and rear | 16 × 7 inch, ET30 | 265/70 R16 |
| Sport / optional 17-inch package | Front and rear | 17 × 7.5 inch, ET30 | 265/65 R17 |
| Limited, 2006–2009 18-inch package | Front and rear | 18 × 7.5 inch, ET25 | 265/60 R18 |
Explained in our guides
Read these before choosing wheels for the 4Runner: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Lifted truck wheel fitment: backspacing, 33s, 35s and trimmingPlan larger truck tyres around lift-kit requirements, backspacing, steering and articulation. Compare 33 and 35 inch tyres without assuming a lift guarantees clearance.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Lifted 17-inch trail
- Front and rear
- 17 × 8.5 inch, ET-10 · 265/70 R17
Documented with Bilstein 5100 dampers and FJ Cruiser springs, giving roughly 2.5–3 inches of lift.
33-inch trail
- Front and rear
- 17 × 8.5 inch, ET-10 · 285/70 R17
A documented lifted setup. Expect alignment work and checks for liner, bumper and body-mount contact; trimming requirements vary.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Toyota's period owner's manual prints 110 Nm alongside 83 lb-ft. Some retailers convert 83 lb-ft to 112 Nm; the manufacturer's printed Nm value is used here.
- Factory alloys use their specified seat-type nuts. Match replacement nuts to the new wheel rather than assuming the original nuts suit every aftermarket wheel.
- A 285/70 R17 tyre is not a universal bolt-on fit. Steering position, caster, suspension travel and body-mount clearance all matter.
- Later-generation Toyota wheels can have different bores and offsets despite sharing six studs.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the 4Runner. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the SR5, 16-inch package front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the fourth-generation 4Runner bolt pattern?
6x139.7 with a 106.1 mm centre bore and M12x1.5 nuts.
Will 265/70 R17 tyres fit a stock fourth-generation 4Runner?
They are a documented upgrade on factory 17x7.5 ET30 wheels. Some tyre designs can still rub.
Do 285/70 R17 tyres need a lift?
The examples here use a lift. Liner or bumper trimming and alignment changes may also be needed; lift alone does not guarantee clearance.
What size tyres does the Toyota 4Runner 4th gen / N210 have?
Factory tyre (tire) sizes for the 2003–2009 Toyota 4Runner 4th gen / N210 are 265/70 R16, 265/65 R17 and 265/60 R18, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Toyota 4Runner 4th gen / N210 use?
Factory wheels are 16 × 7 inch, 17 × 7.5 inch and 18 × 7.5 inch, depending on trim. The stock table lists the offset for each.
What is the Toyota 4Runner 4th gen / N210 centre bore?
106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
What is the Toyota 4Runner 4th gen / N210 wheel nut torque?
110 Nm (about 81 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.
Specs checked against
- 2005 4Runner stock dimensions
- ThreePiece fourth-generation fitment examples
- Toyota 2005 owner's manual, specifications
- SD Wheel generation-specific hardware table
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.