2002–2009 · SUV

Toyota Land Cruiser Prado 120 Series wheel fitment

The Prado 120 is often kept on 17-inch wheels for touring and trail use. The narrow GX factory wheel differs substantially from the wider GXL, VX and Grande package.

6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 17 × 6, 17 × 7.5 inch · Stock tyres: 225/70 R17, 265/65 R17

Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs

Quick specs

Toyota Land Cruiser Prado 120 Series hub and fastener specifications
Specification	Value
Bolt pattern	6x139.7
Stock tyre sizes	225/70 R17 265/65 R17
Centre bore	106.1 mm
Fastener and thread	Wheel nut, M12x1.5
Tightening torque	113 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
Early GX / Standard narrow-wheel package	Front and rear	17 × 6 inch, ET50	225/70 R17
GXL / VX / Grande wide-wheel package	Front and rear	17 × 7.5 inch, ET30	265/65 R17

Explained in our guides

Read these before choosing wheels for the Land Cruiser Prado: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

Touring on factory alloys

Front and rear: 17 × 7.5 inch, ET30 · 265/70 R17

Pradopoint owners document this on standard GXL-type wheels, including a 2003 vehicle with a 2-inch lift. Check the spare carrier and tyre clearances.

Lifted 33-inch-class setup

Front and rear: 17 × 8 inch, ET20 · 285/70 R17

A documented Pradopoint combination. Check upper control arms, mudflaps and body clearance through steering and suspension travel; other owners use lower offsets, so this is not a universal no-rub specification.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

Toyota owner manual OM60D50E specifies 113 Nm. Some workshop and forum tables list 112 Nm, while 103 Nm is often quoted for the later Prado 150. The owner-manual value is used here.
The 17x6 ET50 GX wheel is not equivalent to the 17x7.5 ET30 GXL wheel. Confirm whether the vehicle has factory arch extensions.
Tyres wider or taller than stock need clearance checks at full compression, not only at normal ride height.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Land Cruiser Prado. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the Early GX / Standard narrow-wheel package front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Questions

What is the Prado 120 bolt pattern?

It is 6x139.7, with a 106.1 mm centre bore and M12x1.5 wheel nuts.

Are GX and GXL Prado 120 wheels the same?

No. The documented narrow GX package is 17x6 ET50 with 225/70 R17 tyres; the wider package is 17x7.5 ET30 with 265/65 R17 tyres.

Can a Prado 120 run 285/70 R17 tyres?

Owners document them on 17x8 ET20 wheels, but suspension, alignment and body clearance must be checked. Do not treat this as a guaranteed standard-height fit.

What size tyres does the Toyota Land Cruiser Prado 120 Series have?

Factory tyre (tire) sizes for the 2002–2009 Toyota Land Cruiser Prado 120 Series are 225/70 R17 and 265/65 R17, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Toyota Land Cruiser Prado 120 Series use?

Factory wheels are 17 × 6 inch and 17 × 7.5 inch, depending on trim. The stock table lists the offset for each.

What is the Toyota Land Cruiser Prado 120 Series centre bore?

106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

What is the Toyota Land Cruiser Prado 120 Series wheel nut torque?

113 Nm (about 83 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.