1990–1997 · SUV

Toyota Land Cruiser 80 Series wheel fitment

The 80 Series commonly uses 16-inch wheels with taller all-terrain or mud-terrain tyres. Wheel load capacity, front hub clearance and clearance through axle articulation are central to a usable touring setup.

6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 16 × 6, 16 × 8 inch · Stock tyres: 215/80 R16, 275/70 R16

Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs

Quick specs

Toyota Land Cruiser 80 Series hub and fastener specifications
Specification	Value
Bolt pattern	6x139.7
Stock tyre sizes	215/80 R16 275/70 R16
Centre bore	106.1 mm
Fastener and thread	Wheel nut, M12x1.5
Tightening torque	Confirm in your handbook

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
European narrow-body 16-inch package	Front and rear	16 × 6 inch, ET0	215/80 R16
European / Japanese wide-body 16-inch alloy package	Front and rear	16 × 8 inch, ET0	275/70 R16

Explained in our guides

Read these before choosing wheels for the Land Cruiser: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

33-inch touring on factory-size wheels

Front and rear: 16 × 8 inch, ET0 · 285/75 R16

A well-documented 80 Series combination. Check articulation and steering clearance on the actual vehicle, particularly if suspension has sagged.

Wider 33-inch trail

Front and rear: 16 × 8 inch, ET-22 · 285/75 R16

Retailer package listed for the 80 Series. More outward tyre position requires checks for flare coverage and contact through full axle travel.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

Toyota's 1997 handbook specifies 103 Nm for original aluminium wheels and 147 Nm for steel wheels. A single torque value is omitted; use the specification for the fitted wheel and nut arrangement.
US factory offset listings conflict: some tables give ET14 while owner references identify zero-offset 16x8 wheels. No US-specific stock row is asserted without a confirmed wheel part number.
Early 15-inch and narrow split-rim packages are omitted because a complete trim-specific width, offset and tyre combination was not established.
Front hubs project beyond the mounting face. Centre caps must be deep enough, even when the bore diameter is correct.
100 Series five-stud wheels do not match the 80 Series six-stud pattern.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Land Cruiser. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the European narrow-body 16-inch package front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Questions

What is the Land Cruiser 80 Series stud pattern?

6x139.7 with a 106.1 mm centre bore and M12x1.5 nuts.

Can I use 285/75 R16 tyres on 80 Series 16x8 wheels?

Yes, this is a commonly documented combination. Check steering lock and axle articulation on your suspension.

What torque do 80 Series wheel nuts need?

The 1997 Toyota manual gives 103 Nm for aluminium wheels and 147 Nm for steel wheels. Match the specification to the wheel and hardware.

Will 100 Series wheels fit an 80 Series?

No. Standard 100 Series wheels use a five-stud pattern, while the 80 Series uses six studs.

What is the Toyota Land Cruiser 80 Series bolt pattern?

6x139.7, with a 106.1 mm centre bore and M12x1.5 wheel nuts. Check the exact model year and market in the guide.

What size tyres does the Toyota Land Cruiser 80 Series have?

Factory tyre (tire) sizes for the 1990–1997 Toyota Land Cruiser 80 Series are 215/80 R16 and 275/70 R16, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Toyota Land Cruiser 80 Series use?

Factory wheels are 16 × 6 inch and 16 × 8 inch, depending on trim. The stock table lists the offset for each.

What is the Toyota Land Cruiser 80 Series centre bore?

106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.