2015–present · pickup

Toyota Hilux AN120 / AN130 (N80), 4x4 wheel fitment

The eighth-generation Hilux is commonly fitted with 17-inch all-terrain packages for work and touring. This guide covers normal-track six-stud 4x4 versions; low-riding two-wheel-drive trucks and the wider GR Sport II need separate checks.

6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 17 × 6, 17 × 7.5, 18 × 7.5 inch · Stock tyres: 225/70 R17, 265/65 R17, 265/60 R18

Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs

Quick specs

Toyota Hilux AN120 / AN130 (N80), 4x4 hub and fastener specifications
Specification	Value
Bolt pattern	6x139.7
Stock tyre sizes	225/70 R17 265/65 R17 265/60 R18
Centre bore	106.1 mm
Fastener and thread	Wheel nut, M12x1.5
Tightening torque	105 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
UK Active, 17-inch steel package	Front and rear	17 × 6 inch, ET50	225/70 R17
UK Icon / selected SR5 markets, 17-inch alloy package	Front and rear	17 × 7.5 inch, ET30	265/65 R17
UK Invincible / Invincible X, 18-inch alloy package	Front and rear	18 × 7.5 inch, ET30	265/60 R18

Explained in our guides

Read these before choosing wheels for the Hilux: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

Mild all-terrain upgrade

Front and rear: 17 × 8.5 inch, ET7 · 265/70 R17

Prestige Tyre documents this with Fuel Vector wheels. Check mudflaps and front liners at full lock; a taller tyre can rub even on a lifted Hilux.

Lifted 33-inch touring build

Front and rear: 17 × 9 inch, ET0 · 285/70 R17

Precision Offroad documents this with Dirty Life Mesa wheels and Dobinsons IMS suspension. Allow for tyre coverage and individual arch, liner and body-mount clearance checks.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

The 105 Nm figure is Toyota’s specification for the 4x4. Toyota lists 121 Nm alloy and 152 Nm steel for the separate 4x2 application, so generic Hilux torque tables can be misleading.
Some low-riding 4x2 versions use five-stud hubs. Confirm the vehicle before applying the six-stud specifications in this guide.
Normal-track and wide-track GR Sport II suspension and wheel geometry differ; GR Sport II stock wheels are not included.
Factory Toyota alloy nuts and aftermarket conical-seat nuts are not interchangeable merely because the thread matches.
Trim names and wheel packages vary by country and year; the stock rows identify common UK packages rather than every global variant.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Hilux. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the UK Active, 17-inch steel package front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Questions

What bolt pattern does an N80 Hilux 4x4 use?

It uses 6x139.7 with a 106.1 mm centre bore and M12x1.5 wheel nuts.

What is the wheel nut torque for a Hilux 4x4?

Toyota specifies 105 Nm for the 2015-on 4x4 application. Do not substitute the separate 4x2 figures.

Will 285/70 R17 tyres fit without a lift?

They are not a universal fit without rubbing. Documented builds use suspension changes, and clearance still depends on offset, alignment and the tyre.

Do all eighth-generation Hilux models have six studs?

No. Low-riding 4x2 variants can have different hubs, and the wider GR Sport II has different wheel geometry.

What size tyres does the Toyota Hilux AN120 / AN130 (N80), 4x4 have?

Factory tyre (tire) sizes for the 2015–present Toyota Hilux AN120 / AN130 (N80), 4x4 are 225/70 R17, 265/65 R17 and 265/60 R18, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Toyota Hilux AN120 / AN130 (N80), 4x4 use?

Factory wheels are 17 × 6 inch, 17 × 7.5 inch and 18 × 7.5 inch, depending on trim. The stock table lists the offset for each.

What is the Toyota Hilux AN120 / AN130 (N80), 4x4 centre bore?

106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.