31-inch tyres on factory 15s
- Front and rear
- 15 × 7 inch, ET30 · 31x10.50 R15
Owners on the NewHilux.net Gen 7 forum report running 31x10.50 R15 tyres on the original 15-inch alloys on standard suspension without rubbing.
2004–2015 · pickup
Toyota Hilux AN10/AN20/AN30 wheel fitment
The seventh-generation Hilux 4x4 came on 15, 16 or 17-inch wheels depending on grade and year, with the SR5 moving from 15s to 17s at the 2011 facelift. Owners mostly fit taller all-terrain tyres, often on 16-inch wheels around ET30, and the limits are usually the front mudflaps and bumper at full lock rather than the arches.
6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 15 × 7, 17 × 7.5, 17 × 6, 16 × 6 inch · Stock tyres: 255/70 R15, 265/65 R17, 225/70 R17, 205 R16
Updated 2026-10-31 · Medium source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 106.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | Confirm in your handbook |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| SR5 4x4, 15-inch alloy (2005–2011) | Front and rear | 15 × 7 inch, ET30 | 255/70 R15 |
| SR5 4x4, 17-inch alloy (2011–2015) | Front and rear | 17 × 7.5 inch, ET30 | 265/65 R17 |
| SR 4x4, 17-inch steel (2011–2015) | Front and rear | 17 × 6 inch, ET50 | 225/70 R17 |
| SR 4x4, 16-inch steel | Front and rear | 16 × 6 inch, ET45 | 205 R16 |
Explained in our guides
Read these before choosing wheels for the Hilux: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Lifted truck wheel fitment: backspacing, 33s, 35s and trimmingPlan larger truck tyres around lift-kit requirements, backspacing, steering and articulation. Compare 33 and 35 inch tyres without assuming a lift guarantees clearance.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
16x7 ET30 with 265/75 R16
- Front and rear
- 16 × 7 inch, ET30 · 265/75 R16
A common NewHilux.net combination: owners report 265/75 R16 on 16x7 ET30 wheels with no problems, though some had to remove the front mudflaps because they touched at full lock.
Factory 17s with 265/70 R17
- Front and rear
- 17 × 7.5 inch, ET30 · 265/70 R17
SR5 owners on NewHilux.net run 265/70 R17 on the factory 17x7.5 ET30 alloys; one reports it just misses the front bumper on full lock, with no other contact.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- This guide covers six-stud 4x4 and high-riding versions. Low-riding two-wheel-drive versions use 5x114.3 with a 60.1 mm bore, so these figures do not apply to them.
- Toyota alloys on this generation are ET30, while SR steel wheels are higher offset (about ET45 to ET50). Owners note this when swapping between steel and alloy wheels.
- Fitment databases disagree on the 2005–2011 15-inch alloy offset, with some listing a much lower figure than ET30. Check the stamping inside the wheel.
- Taller tyres usually touch the front mudflaps and the bumper corners at full lock before anything else. Lower offsets than about ET20 with 275 or wider tyres are reported to contact the upper control arms or inner guards.
- Some owners report that 16-inch wheels foul the front calipers on later trucks. Check caliper clearance before buying 16s for a 17-inch truck.
- We have not confirmed Toyota's wheel-nut torque for this generation from a Toyota source. Use the figure in the owner's manual.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Hilux. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the SR5 4x4, 15-inch alloy (2005–2011) front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the bolt pattern of a 2005–2015 Hilux 4x4?
6x139.7 with a 106.1 mm centre bore and M12x1.5 wheel nuts. Low-riding two-wheel-drive models use 5x114.3 instead.
What offset are factory Hilux alloys?
The SR5 alloys, including the 17x7.5 wheels from 2011, are ET30. SR steel wheels are higher, around ET45 to ET50.
Will 265/75 R16 tyres fit a Gen 7 Hilux?
Owners commonly run them on 16x7 ET30 wheels. Expect to check or remove the front mudflaps, and confirm the 16-inch wheel clears your calipers.
Can I fit 31-inch tyres without a lift?
Owners report 31x10.50 R15 on the original 15-inch alloys at standard height without rubbing. Check your local rules on tyre diameter changes.
What size tyres does the Toyota Hilux AN10/AN20/AN30 have?
Factory tyre (tire) sizes for the 2004–2015 Toyota Hilux AN10/AN20/AN30 are 255/70 R15, 265/65 R17, 225/70 R17 and 205 R16, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Toyota Hilux AN10/AN20/AN30 use?
Factory wheels are 15 × 7 inch, 17 × 7.5 inch, 17 × 6 inch and 16 × 6 inch, depending on trim. The stock table lists the offset for each.
What is the Toyota Hilux AN10/AN20/AN30 centre bore?
106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- TireWheelGuide: 2012 Hilux factory sizes, bores and thread
- Cararac: seventh-generation Hilux factory wheel sizes
- NewHilux.net: Gen 7 wheel and tyre calculator thread
- NewHilux.net: 275/70R16 +30 offset, will it fit?
- NewHilux.net: 2011 SR5 tyre options
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.