18x8 with wider tyres
- Front and rear
- 18 × 8 inch, ET40 · 245/45 R18
A 2014.5 Camry SE owner on ToyotaNation moved from the factory 17s to 18x8 ET40 wheels with 245/45 R18 tyres and reports no clearance or rubbing problems.
2012–2017 · saloon
Toyota Camry XV50 wheel fitment
The XV50 Camry is a common used saloon, and the SE and XSE grades attract owners who want bigger wheels and a lower stance. Factory wheels run from 16 to 18 inches, and the offset changed from ET45 to ET40 with the 2015 facelift.
5x114.3 bolt pattern · 60.1 mm centre bore · Stock wheels: 16 × 6.5, 17 × 7, 18 × 7.5, 16 × 7 inch · Stock tyres: 205/65 R16, 215/55 R17, 225/45 R18
Updated 2026-10-31 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 60.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | 103 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| 2012–2014, 16-inch | Front and rear | 16 × 6.5 inch, ET45 | 205/65 R16 |
| 2012–2014, 17-inch | Front and rear | 17 × 7 inch, ET45 | 215/55 R17 |
| 2012–2014, 18-inch | Front and rear | 18 × 7.5 inch, ET45 | 225/45 R18 |
| 2015–2017, 16-inch | Front and rear | 16 × 7 inch, ET40 | 205/65 R16 |
| 2015–2017, 17-inch | Front and rear | 17 × 7 inch, ET40 | 215/55 R17 |
| 2015–2017, 18-inch | Front and rear | 18 × 7.5 inch, ET40 | 225/45 R18 |
Explained in our guides
Read these before choosing wheels for the Camry: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
20x8.5 on lowering springs
- Front and rear
- 20 × 8.5 inch, ET40
A ToyotaNation member runs 20x8.5 ET40 on all four corners with H&R lowering springs and says it does not rub.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Offsets differ between the two halves of this generation: ET45 for 2012–2014 factory wheels and ET40 for 2015–2017. Check which your car has before comparing an aftermarket wheel.
- One ToyotaNation owner runs 19x8.5 ET20 front with 225/40 R19 and 19x9.5 ET20 rear with 255/35 R19 on Eibach springs. The rears needed rolling, and it still rubs slightly over large bumps at speed.
- Another owner running 20x8.5 wheels with a tucked tyre rolled the rear arches and still touches the plastic liners over steep bumps.
- The hub bore is 60.1 mm and the wheel nuts are M12x1.5, torqued to 103 Nm. Wheels with a larger bore need hub-centric rings.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Camry. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the 2012–2014, 16-inch front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the bolt pattern of the 2012–2017 Camry?
5x114.3, with a 60.1 mm centre bore, M12x1.5 wheel nuts and a 103 Nm tightening torque.
What offset are the factory wheels?
ET45 on 2012–2014 cars and ET40 on 2015–2017 cars. The 16-inch wheel also grew from 6.5 to 7 inches wide with the facelift.
Can I fit 18x8 wheels to a Camry that came on 17s?
Yes. An owner documents 18x8 ET40 with 245/45 R18 tyres on a 2014.5 SE with no rubbing. The tyre is about 1.4% taller than the factory 215/55 R17.
Will 19 or 20-inch wheels fit when lowered?
A 20x8.5 ET40 set is documented on lowering springs without rubbing. Lower offsets around ET20 on 19s needed rolled rear arches and still rubbed over big bumps.
What size tyres does the Toyota Camry XV50 have?
Factory tyre (tire) sizes for the 2012–2017 Toyota Camry XV50 are 205/65 R16, 215/55 R17 and 225/45 R18, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Toyota Camry XV50 use?
Factory wheels are 16 × 6.5 inch, 17 × 7 inch, 18 × 7.5 inch and 16 × 7 inch, depending on trim. The stock table lists the offset for each.
What is the Toyota Camry XV50 centre bore?
60.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
What is the Toyota Camry XV50 wheel nut torque?
103 Nm (about 76 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.
Specs checked against
- Wheel-Size: 2013 Camry OE sizes, bore, thread and torque
- Wheel-Size: 2015 Camry OE sizes, thread and torque
- TireWheelGuide: 2013 Camry sizes, bore and thread
- TireWheelGuide: 2015 Camry sizes, bore and thread
- ToyotaNation: 2014 Camry SE wheels
- ToyotaNation: 19x8.5 and 19x10 on a 2012 Camry SE
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.