2006–2022 · SUV
The FJ Cruiser commonly runs 16- or 17-inch wheels with all-terrain tyres. Larger tyres need attention to the front body mounts and steering clearance, even when the suspension is lifted.
6x139.7 bolt pattern · 106.1 mm centre bore · Stock wheels: 17 × 7.5, 16 × 7.5 inch · Stock tyres: 265/70 R17, 265/75 R16
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 106.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | 113 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| Standard 17-inch steel / alloy package | Front and rear | 17 × 7.5 inch, ET15 | 265/70 R17 |
| TRD Special Edition / selected Trail Teams 16-inch package | Front and rear | 16 × 7.5 inch, ET15 | 265/75 R16 |
Read these before choosing wheels for the FJ Cruiser: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
FJ owners document this tyre on factory 16-inch wheels. Alignment affects rubbing; inspect the front body mount and liners rather than assuming a lift alone provides clearance.
Custom Offsets documents this combination with Reika R45 wheels. Check body mounts, mudflaps and guard coverage; trimming or a body-mount modification may be needed on the individual vehicle.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the FJ Cruiser. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the Standard 17-inch steel / alloy package front size. Choose your own trim or axle in the calculator if it differs.
It is 6x139.7 with a 106.1 mm centre bore and M12x1.5 nuts.
The factory TRD 16-inch package does. Clearance of another wheel depends on its barrel and spoke design.
They can. Wheel offset, tyre construction and alignment affect contact with the body mount and liners; a lift does not guarantee clearance.
Factory tyre (tire) sizes for the 2006–2022 Toyota FJ Cruiser XJ10 are 265/70 R17 and 265/75 R16, depending on trim. Your tyre placard shows the size for your car.
Factory wheels are 17 × 7.5 inch and 16 × 7.5 inch, depending on trim. The stock table lists the offset for each.
106.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
113 Nm (about 83 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.
2003–2009 · 6x139.7
2010–2024 · 6x139.7
2012–2018 · 5x114.3
1996–2001 · 5x114.3
2018–present · 5x100
1983–1987 · 4x114.3