2019–present · coupe

Toyota GR Supra A90 / A91 wheel fitment

The GR Supra uses staggered factory wheels and BMW-derived wheel bolts. Owners often choose a square 18-inch set for track use or a slightly lower-offset 19-inch set for the road.

5x112 bolt pattern · 66.6 mm centre bore · Stock wheels: 19 × 9, 19 × 10, 18 × 9, 18 × 10 inch · Stock tyres: 255/35 R19, 275/35 R19, 255/40 R18, 275/40 R18

Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs

Quick specs

Toyota GR Supra A90 / A91 hub and fastener specifications
Specification	Value
Bolt pattern	5x112
Stock tyre sizes	255/35 R19 275/35 R19 255/40 R18 275/40 R18
Centre bore	66.6 mm
Fastener and thread	Wheel bolt, M14x1.25
Tightening torque	140 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
3.0 / 3.0 Premium, 19-inch package	Front	19 × 9 inch, ET32	255/35 R19
3.0 / 3.0 Premium, 19-inch package	Rear	19 × 10 inch, ET40	275/35 R19
2.0, 18-inch package, including US specification	Front	18 × 9 inch, ET32	255/40 R18
2.0, 18-inch package, including US specification	Rear	18 × 10 inch, ET40	275/40 R18

Explained in our guides

Read these before choosing wheels for the GR Supra: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

19-inch staggered road fitment

Front: 19 × 9 inch, ET28 · 255/35 R19
Rear: 19 × 10 inch, ET38 · 275/35 R19

Apex documents this SM-10 combination as a direct fit. It retains the factory 3.0 tyre sizes.

Square 18-inch road and track

Front and rear: 18 × 10 inch, ET30 · 275/35 R18

Apex documents this with Falken RT660 tyres. Front spring-perch clearance is tyre-model dependent; inspect the exact tyre profile before use.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

The A90 uses 5x112 and wheel bolts, unlike the A80's 5x114.3 stud-and-nut arrangement.
Some catalogues round the hub dimension to 66.5 mm; the cited A90 wheel fitment references specify 66.6 mm. Use rings explicitly sold for the A90 application.
Wide or tall 18-inch front tyres can contact the factory spring perch. Wheel diameter alone does not establish clearance.
Factory wheel bolt torque is 140 Nm. Use the bolt seat and length specified for the wheel and any spacers.
Japanese 2.0 SZ models also had a 17-inch package; it is omitted because its complete front and rear offset specification was not verified.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the GR Supra. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the 3.0 / 3.0 Premium, 19-inch package front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Staggered rear axle

Compare tyre sizes (rear)Compare wheel offsets (rear)Check tyre and rim width (rear)Convert offset to backspacing (rear)

Questions

What is the A90 Supra bolt pattern?

5x112, with a nominal 66.6 mm centre bore and M14x1.25 wheel bolts.

Will Mk4 Supra wheels fit an A90?

No. The A80 uses 5x114.3, so its wheels do not bolt onto the A90 hubs.

Can an A90 run 18-inch wheels?

Yes. A tested option is 18x10 ET30 with 275/35 R18 tyres. Front spring-perch and brake clearance must be checked.

What is the A90 wheel bolt torque?

140 Nm for the original wheel bolt arrangement.

What size tyres does the Toyota GR Supra A90 / A91 have?

Factory tyre (tire) sizes for the 2019–present Toyota GR Supra A90 / A91 are 255/35 R19, 275/35 R19, 255/40 R18 and 275/40 R18, depending on trim, with wider rears on staggered setups. Your tyre placard shows the size for your car.

What wheel size does the Toyota GR Supra A90 / A91 use?

Factory wheels are 19 × 9 inch, 19 × 10 inch, 18 × 9 inch and 18 × 10 inch, depending on trim. The stock table lists the offset for each.

What is the Toyota GR Supra A90 / A91 centre bore?

66.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.