2022–present · coupe

Toyota GR86 ZN8 wheel fitment

The GR86 uses a square factory wheel setup and retains the 5x100 hubs of the earlier GT86. Lightweight 17-inch replacements are common for track days, while wider setups need particular attention to the rear quarter-panel lip.

5x100 bolt pattern · 56.1 mm centre bore · Stock wheels: 17 × 7.5, 18 × 7.5 inch · Stock tyres: 215/45 R17, 215/40 R18

Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs

Quick specs

Toyota GR86 ZN8 hub and fastener specifications
Specification	Value
Bolt pattern	5x100
Stock tyre sizes	215/45 R17 215/40 R18
Centre bore	56.1 mm
Fastener and thread	Wheel nut, M12x1.25
Tightening torque	120 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
Base / Japanese SZ	Front and rear	17 × 7.5 inch, ET48	215/45 R17
Premium / UK specification / Japanese RZ	Front and rear	18 × 7.5 inch, ET48	215/40 R18

Explained in our guides

Read these before choosing wheels for the GR86: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

17-inch daily

Front and rear: 17 × 8 inch, ET40 · 225/45 R17

Apex lists this as a direct fit with its vehicle-specific wheels. It provides a taller sidewall than the factory 18-inch option.

Balanced road and track

Front and rear: 17 × 8.5 inch, ET44 · 235/40 R17

Apex staff recommendation for this wheel size. Check the exact tyre and alignment if the car is lowered.

Wider 17-inch track setup

Front and rear: 17 × 9 inch, ET42 · 245/40 R17

Extra negative camber can be needed with wider compounds. Camber added at the knuckle may require a 5 mm front spacer; rear quarter-panel lip clearance may require trimming. Measure before ordering.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

The hub pattern is 5x100, not the 5x114.3 used by many other Toyota and Subaru performance cars.
Wheel nuts are M12x1.25. M12x1.5 Toyota nuts have the wrong thread.
Brembo-equipped cars need a confirmed brake-compatible wheel. Apex tests the listed wheel designs; the same diameter and offset on another design is not proof of clearance.
The rear quarter-panel lip can obstruct wider wheels. A wide fitment carried over from the first generation is not automatically suitable for this body.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the GR86. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the Base / Japanese SZ front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Questions

What is the GR86 bolt pattern?

5x100, with a 56.1 mm centre bore and M12x1.25 wheel nuts.

What is the GR86 wheel nut torque?

Toyota specifies 120 Nm, equivalent to 89 lb ft.

Can I use 17-inch wheels on a GR86 with Brembos?

Yes, with a tested brake-compatible design. Apex lists suitable 17-inch wheels, but other designs need their own clearance check.

Do 17x9 wheels fit a GR86 without modification?

Some combinations fit, but 17x9 ET42 with 245/40 R17 tyres can require camber, front spacers or rear lip trimming depending on the tyre and suspension.

What size tyres does the Toyota GR86 ZN8 have?

Factory tyre (tire) sizes for the 2022–present Toyota GR86 ZN8 are 215/45 R17 and 215/40 R18, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Toyota GR86 ZN8 use?

Factory wheels are 17 × 7.5 inch and 18 × 7.5 inch, depending on trim. The stock table lists the offset for each.

What is the Toyota GR86 ZN8 centre bore?

56.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Toyota or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.