RTR wheels with near-35-inch tyres
- Front and rear
- 17 × 9 inch, ET30 · 315/70 R17
Documented with RTR Evo 6 wheels and a 1.5-inch front levelling lift. Check full-travel clearance and upper control-arm spacing with the exact tyre.
2022–present · pickup
Ford Ranger Raptor P703 wheel fitment
The P703 Ranger Raptor uses 17-inch wheels and 33-inch tyres from the factory. Owners commonly move to wider positive-offset wheels for larger tyres, with clearance around the upper control arms remaining an important constraint.
6x139.7 bolt pattern · 93.1 mm centre bore · Stock wheels: 17 × 8.5 inch · Stock tyres: 285/70 R17
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 93.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | 135 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| Raptor standard alloy wheels | Front and rear | 17 × 8.5 inch, ET55 | 285/70 R17 |
| Raptor optional beadlock-capable factory wheels | Front and rear | 17 × 8.5 inch, ET55 | 285/70 R17 |
Explained in our guides
Read these before choosing wheels for the Ranger Raptor: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Lifted truck wheel fitment: backspacing, 33s, 35s and trimmingPlan larger truck tyres around lift-kit requirements, backspacing, steering and articulation. Compare 33 and 35 inch tyres without assuming a lift guarantees clearance.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Geiser lifted trail build
- Front and rear
- 17 × 9 inch, ET18
Geiser documents KMC Trek wheels with 35-inch BFG KO2 tyres and its front and rear lift springs. Its instructions warn that trimming and other clearance work may still be required.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- This is the second-generation Ranger Raptor, sold from 2022 in some markets and from model year 2024 in North America. First-generation Ranger Raptor, F-150 Raptor and Bronco Raptor specifications must not be substituted.
- Ford specifies M12x1.5 wheel nuts tightened to 135 Nm. Larger Raptor models use different hardware and are a frequent source of incorrect cross-references.
- The factory ET55 wheels sit close to the upper control arms with wider 35-inch tyres. Confirm dynamic clearance rather than relying on a small static gap.
- Beadlock-capable does not mean the wheel is supplied as an operational beadlock. Follow Ford instructions for the exact wheel configuration.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Ranger Raptor. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the Raptor standard alloy wheels front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the P703 Ranger Raptor bolt pattern?
It is 6x139.7 with a 93.1 mm centre bore.
Does the Ranger Raptor use M14 wheel nuts?
The P703 Ranger Raptor uses M12x1.5 nuts. Ford specifies 135 Nm for the road wheels.
What size are the factory Ranger Raptor wheels?
The documented standard and optional beadlock-capable packages are 17x8.5 ET55 with 285/70 R17 tyres.
Will 35-inch tyres fit the stock wheels?
They can sit very close to the upper control arms at ET55. Documented larger-tyre builds use lower positive offsets and suspension changes; check clearance throughout travel.
What size tyres does the Ford Ranger Raptor P703 have?
Factory tyre (tire) sizes for the 2022–present Ford Ranger Raptor P703 are 285/70 R17, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Ford Ranger Raptor P703 use?
Factory wheels are 17 × 8.5 inch, depending on trim. The stock table lists the offset for each.
What is the Ford Ranger Raptor P703 centre bore?
93.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
What is the Ford Ranger Raptor P703 wheel nut torque?
135 Nm (about 100 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.
Specs checked against
- Ford: 2024 P703 Ranger owner manual
- Ranger6G: Raptor nut thread and torque reports
- Element Wheels: P703 Raptor hub and wheel hardware
- ZOKU: Ranger and Raptor PCD and hub bore
- Ford: original 17-inch Raptor wheel
- Ford: Raptor beadlock-capable wheel kit
- Ranger6G: RTR 17x9 ET30 and 315/70 R17 build
- Geiser Off-Road: lifted Ranger Raptor build
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Ford or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.