12 car guides · 4 fasteners
4x100 bolt pattern
4x100 places 4 fastener centres evenly around a 100 mm pitch circle. Use the car list below to check the hub and thread details that the bolt pattern alone cannot tell you.
The stud circle explained
4 is the number of wheel nuts or bolts. 100 is the pitch circle diameter in millimetres, equivalent to 3.937 inches.
On an even-stud pattern, the centre-to-centre distance between opposite fasteners equals the PCD.
Count and measure the actual hubs on a converted car. A nearby PCD is a different pattern. How to measure a bolt pattern shows the method, including five-stud hubs.
Cars in our guides with 4x100
Grouped by make. Values come from each linked guide and its sources. Where a generation has more than one pattern, confirm the trim and market in the guide.
Honda
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Honda Civic EK / sixth generation, non-Type R (1996–2000) | 56.1 mm | M12x1.5 · nut | Listed generation; check exact trim |
Mazda
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Mazda MX-5 Miata NA (1989–1997) | 54.1 mm | M12x1.5 · nut | Listed generation; check exact trim |
| Mazda MX-5 Miata NB (1998–2005) | 54.1 mm | M12x1.5 · nut | Listed generation; check exact trim |
| Mazda MX-5 Miata ND (2015–present) | 54.1 mm | M12x1.5 · nut | Listed generation; check exact trim |
MINI
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| MINI Cooper S / JCW R53 (2002–2006) | 56.1 mm | Thread not confirmed · bolt | Listed generation; check exact trim |
| MINI Cooper S / John Cooper Works R56 (2006–2013) | 56.1 mm | M14x1.25 · bolt | Listed generation; check exact trim |
Nissan
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Nissan Almera / Versa sedan N17 (2011–2019) | 60.1 mm | M12x1.25 · nut | Listed generation; check exact trim |
Renault
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Renault Clio Renaultsport 172 / 182 Mk2 (1999–2005) | 60.1 mm | M12x1.5 · bolt | Listed generation; check exact trim |
Skoda
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Skoda Felicia 6U (Typ 791) (1994–2001) | 57.1 mm | M12x1.5 · bolt | Listed generation; check exact trim |
Toyota
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Toyota MR2 Roadster / MR-S ZZW30 (1999–2007) | 54.1 mm | M12x1.5 · nut | Listed generation; check exact trim |
Volkswagen
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Volkswagen Golf / GTI / VR6 Mk3 (1991–1997) | 57.1 mm | M12x1.5 (4-bolt) / M14x1.5 (5-bolt) · bolt | 4x100 / 5x100: varies by version, see guide |
| Volkswagen Golf / GTI Mk1 (1974–1983) | 57.1 mm | M12x1.5 · bolt | Listed generation; check exact trim |
Centre bores and hub-centric rings
Recorded centre bores run from 54.1 to 60.1 mm. The recorded values are 54.1 mm, 56.1 mm, 57.1 mm, 60.1 mm. These figures describe the cars in our guides, not every 4x100 wheel or vehicle.
If the wheel maker specifies a centring ring, its outside diameter must match the wheel bore and its inside diameter must match your hub. A larger wheel bore may accept a suitable ring; a wheel bore smaller than the hub will not be made to fit by adding one. Confirm ring shape, depth and suitability with the wheel supplier. Our guide to hub-centric rings covers when you need them.
For example, a wheel with a confirmed 60.1 mm bore on a 54.1 mm hub would need those two ring diameters if the wheel design supports rings. This illustrates the dimensions only, not an approved wheel swap.
Explained in our guides
- How to measure a wheel bolt pattern, including five studsMeasure wheel PCD correctly on four, five, six and eight stud patterns, avoid near-match mistakes, and check the other dimensions before a wheel swap.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
- Wheel spacers: safety checks and how to choose a sizeCalculate spacer effects on offset and track width, distinguish slip-on and bolt-on systems, and check hub engagement, fasteners and moving clearance.
Before sharing wheels between cars
Compare offset and width, the hub bore, nut or bolt seat, thread and engagement, wheel load rating, brake clearance and tyre clearance. Keep the correct fasteners and tightening specification for the actual car and wheel.
Questions
What does 4x100 mean?
It means 4 equally spaced fasteners on a circle 100 mm in diameter. PCD stands for pitch circle diameter. It measures the circle through the fastener centres, not the centre bore.
Which cars use 4x100?
Our guides include Honda Civic EK / sixth generation, non-Type R, Mazda MX-5 Miata NA, Mazda MX-5 Miata NB, Mazda MX-5 Miata ND and 8 more generations. Check each guide for model-year, trim and market differences; this is not a complete list of all cars with this pattern.
Do all 4x100 wheels have the same centre bore?
Recorded centre bores run from 54.1 to 60.1 mm. The bolt pattern does not specify the bore. Compare the exact wheel bore with your vehicle hub before ordering.
Can I swap wheels between cars with 4x100?
A matching pattern alone is not enough. Check wheel width and offset, centre bore, brake clearance, fastener thread and seat, load capacity and tyre clearance. A centring ring cannot correct a different bolt pattern or offset.
Reference notes
Vehicle figures are drawn from the linked fitment guides. For general fitting checks, see Tire Rack’s wheel fitment checks and Discount Tire’s hub ring guidance.