1993–1998 · coupe
The S14 is commonly fitted with 17-inch wheels for road and drift use. Check the hubs first: Japanese naturally aspirated cars can retain four studs, while turbo K’s models use five.
4x114.3 / 5x114.3 bolt pattern · 66.1 mm centre bore · Stock wheels: 15 × 6, 16 × 6.5 inch · Stock tyres: 205/60 R15, 205/55 R16
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.1 mm |
| Fastener and thread | Wheel nut, M12x1.25 |
| Tightening torque | Confirm in your handbook |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| Naturally aspirated JDM, 15-inch alloy equipment | Front and rear | 15 × 6 inch, ET40 | 205/60 R15 |
| JDM K’s turbo, 16-inch equipment | Front and rear | 16 × 6.5 inch, ET45 | 205/55 R16 |
Read these before choosing wheels for the Silvia: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
An S14 owner reports this 5Zigen combination without spacers, with approximately one degree of negative camber. Confirm tyre approval for each wheel width.
A frequently discussed S14 combination, with an owner showing the wheel fitment and another recommending 235/45 tyres. Check coilover and arch clearance on the actual car; lowering can change the result.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the Silvia. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the Naturally aspirated JDM, 15-inch alloy equipment front size. Choose your own trim or axle in the calculator if it differs.
No. Japanese naturally aspirated versions can be 4x114.3, while K’s turbo versions are 5x114.3. Modified cars may have different hubs.
The original studs take M12x1.25 nuts. Nissan specifies a tightening range of 98–118 Nm.
17x9 ET20 is a documented square fitment. Tyre width, ride height and suspension clearance still need checking.
4x114.3 / 5x114.3, with a 66.1 mm centre bore and M12x1.25 wheel nuts. Check the exact model year and market in the guide.
Factory tyre (tire) sizes for the 1993–1998 Nissan Silvia S14 are 205/60 R15 and 205/55 R16, depending on trim. Your tyre placard shows the size for your car.
66.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Nissan or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.