Stock-height daily
- Front and rear
- 16 × 8 inch, ET0 · 265/70R16
Documented on a stock 2019 Frontier without spacers. The owner reports slight front liner contact at full lock; check and correct this before use.
2005–2021 · Pickup
Nissan Navara / Frontier D40 wheel fitment
The D40 uses a smaller six-stud pattern than many Japanese pickups. Spanish and Thai Navaras also have different factory offsets, so establish the build origin before buying replacement wheels.
6x114.3 bolt pattern · 66.1 mm centre bore · Stock wheels: 16 × 7, 18 × 7.5, 17 × 7 inch · Stock tyres: 265/70R16, 265/75R16, 265/60R18, 255/65R17, 255/70R16
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| Frontier SV V6, US 16-inch | Front and rear | 16 × 7 inch, ET30 | 265/70R16 |
| Frontier Nismo / PRO-4X, US | Front and rear | 16 × 7 inch, ET30 | 265/75R16 |
| Frontier SL, US | Front and rear | 18 × 7.5 inch, ET30 | 265/60R18 |
| Navara ST-X, Spanish-built 17-inch | Front and rear | 17 × 7 inch, ET30 | 255/65R17 |
| Navara, Thai-built 16-inch alloy | Front and rear | 16 × 7 inch, ET45 | 255/70R16 |
Explained in our guides
Read these before choosing wheels for the Navara / Frontier: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Lifted truck wheel fitment: backspacing, 33s, 35s and trimmingPlan larger truck tyres around lift-kit requirements, backspacing, steering and articulation. Compare 33 and 35 inch tyres without assuming a lift guarantees clearance.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Stock-height all-terrain
- Front and rear
- 16 × 8 inch, ET0 · 265/75R16
A 2014 Frontier owner reports no rubbing or trimming on standard suspension without spacers. Other builds rub, so this is an example rather than a universal clearance claim.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- The D40 is 6x114.3; D22 wheels with 6x139.7 do not bolt on.
- The 133 Nm torque comes from Nissan's Frontier manual and is corroborated by torque references. Check the manual for the particular Navara market.
- The ST-X 550 needs suitable brake clearance; CSA excludes its 16x8 fitment on this variant.
- The popular examples are US Frontiers. Do not assume identical arch and brake clearance on every Navara.
- Factory tyre sizes and offsets vary with origin, year and trim; check the wheel stamp and tyre placard.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Navara / Frontier. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the Frontier SV V6, US 16-inch front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the bolt pattern of the D40 Navara?
It is 6x114.3 with a 66.1 mm centre bore and M12x1.25 wheel nuts.
Do Thai and Spanish D40 Navaras use the same offset?
Not always. The listed Thai 16-inch alloy is ET45; the Spanish ST-X 17-inch wheel is ET30.
Will 265/75R16 tyres fit a stock Frontier?
That is a factory Nismo / PRO-4X size. On wider ET0 wheels, owners report both clear fitment and liner contact, so wheel choice matters.
Will 16-inch wheels fit a Navara ST-X 550?
Do not assume so. CSA specifically excludes its 16x8 application on the ST-X 550 because clearance differs.
What size tyres does the Nissan Navara / Frontier D40 have?
Factory tyre (tire) sizes for the 2005–2021 Nissan Navara / Frontier D40 are 265/70R16, 265/75R16, 265/60R18, 255/65R17 and 255/70R16, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Nissan Navara / Frontier D40 use?
Factory wheels are 16 × 7 inch, 18 × 7.5 inch and 17 × 7 inch, depending on trim. The stock table lists the offset for each.
What is the Nissan Navara / Frontier D40 centre bore?
66.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
What is the Nissan Navara / Frontier D40 wheel nut torque?
133 Nm (about 98 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.
Specs checked against
- Nissan 2012 Frontier owner's manual
- TireWheelGuide: 2012 Frontier specifications
- WheelFitment: Navara
- Frontier wheel nut torque reference
- CSA: Spanish D40 fitments
- Navara Forum: Thai factory wheel dimensions
- Custom Offsets: 2019 Frontier owner build
- Custom Offsets: 2014 Frontier owner build
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Nissan or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.