17-inch all-terrain
- Front and rear
- 17 × 8 inch, ET20 · 265/70 R17
ROH documents this wheel size on the NP300; a separate Black Rhino build documents the tyre combination. Check liners and full-lock clearance for the chosen tyre and ride height.
2014–present · pickup
Nissan Navara / NP300 D23 wheel fitment
The D23 is commonly modified with 17-inch all-terrain wheel packages. Its 6x114.3 mounting pattern needs particular attention when shopping among wheels advertised for Japanese pickups.
6x114.3 bolt pattern · 66.1 mm centre bore · Stock wheels: 16 × 6, 16 × 7, 17 × 7, 18 × 7 inch · Stock tyres: 205 R16, 255/70 R16, 255/65 R17, 255/60 R18
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.1 mm |
| Fastener and thread | Wheel nut, M12x1.25 |
| Tightening torque | 133 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| Selected entry-level narrow-body commercial models | Front and rear | 16 × 6 inch, ET55 | 205 R16 |
| Selected 16-inch wide-body packages | Front and rear | 16 × 7 inch, ET45 | 255/70 R16 |
| Selected ST / mid-range 17-inch packages | Front and rear | 17 × 7 inch, ET45 | 255/65 R17 |
| Selected ST-X / Tekna 18-inch packages | Front and rear | 18 × 7 inch, ET45 | 255/60 R18 |
Explained in our guides
Read these before choosing wheels for the Navara / NP300: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Lifted truck wheel fitment: backspacing, 33s, 35s and trimmingPlan larger truck tyres around lift-kit requirements, backspacing, steering and articulation. Compare 33 and 35 inch tyres without assuming a lift guarantees clearance.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
20-inch road build
- Front and rear
- 20 × 9 inch, ET30
A fitted NP300 with XD Heist wheels is documented by Motorsport Wheels and Tyres. The gallery does not publish the tyre size or suspension details, so these are not inferred.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Nissan specifies 133 Nm in the D23 owner manual. A third-party torque guide lists 98–118 Nm; the manufacturer figure is used here.
- Wheel and tyre packages differ between markets, cab types and facelift models. The rows identify documented packages, not a universal specification for each trim name.
- The D23 pattern is 6x114.3, not the 6x139.7 pattern used by the Patrol.
- Warrior and Arctic Trucks conversions require their own wheel and clearance information. They are not covered by the standard factory rows.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Navara / NP300. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the Selected entry-level narrow-body commercial models front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the D23 Navara bolt pattern?
It is 6x114.3, with a nominal 66.1 mm centre bore and M12x1.25 wheel nuts.
What is the NP300 wheel nut torque?
The Nissan D23 owner manual specifies 133 Nm.
Do 265/70 R17 tyres fit a Navara?
They appear on documented D23 builds with 17x8 ET20 wheels. Confirm full-lock and compression clearance on your vehicle before fitting.
What size tyres does the Nissan Navara / NP300 D23 have?
Factory tyre (tire) sizes for the 2014–present Nissan Navara / NP300 D23 are 205 R16, 255/70 R16, 255/65 R17 and 255/60 R18, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Nissan Navara / NP300 D23 use?
Factory wheels are 16 × 6 inch, 16 × 7 inch, 17 × 7 inch and 18 × 7 inch, depending on trim. The stock table lists the offset for each.
What is the Nissan Navara / NP300 D23 centre bore?
66.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- TireWheelGuide: D23 factory packages
- YARA: D23 mounting specifications
- Nissan: D23 owner manual
- WhatSizeBolt: conflicting torque listing
- ROH: NP300 17x8 ET20 fitted gallery
- Wheel Front: D23 Black Rhino build
- Motorsport Wheels and Tyres: NP300 XD Heist build
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Nissan or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.