2006–2015 · pickup

Mitsubishi Triton / L200 4th gen (ML/MN, Australia) wheel fitment

Australian ML and MN Tritons commonly use sixteen- or seventeen-inch wheels with taller all-terrain tyres. The original narrow steel wheel and wider alloy packages have different offsets, so start with the actual wheel specification.

6x139.7 bolt pattern · 67.1 mm centre bore · Stock wheels: 16 × 6, 16 × 7, 17 × 7, 17 × 7.5 inch · Stock tyres: 205 R16, 245/70 R16, 245/65 R17

Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs

Quick specs

Mitsubishi Triton / L200 4th gen (ML/MN, Australia) hub and fastener specifications
Specification	Value
Bolt pattern	6x139.7
Stock tyre sizes	205 R16245/70 R16 245/65 R17
Centre bore	67.1 mm
Fastener and thread	Wheel nut, M12x1.5
Tightening torque	Confirm in your handbook

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
ML GLX narrow steel package	Front and rear	16 × 6 inch, ET46	205 R16
ML VR / early GLX-R alloy package	Front and rear	16 × 7 inch, ET38	245/70 R16
Later ML GLX-R / MN GL-R	Front and rear	17 × 7 inch, ET38	245/65 R17
MN GLX-R	Front and rear	17 × 7.5 inch, ET38	245/65 R17

Explained in our guides

Read these before choosing wheels for the Triton / L200: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

16-inch touring with flared arches

Front and rear: 16 × 7 inch, ET26 · 265/75 R16

Prado 90 wheel fitment documented in the ML/MN owners' guide as sitting near the GLX-R flare edge. Check nut seats and the larger donor wheel bore.

17-inch touring

Front and rear: 17 × 8 inch, ET20 · 265/65 R17

Owner-documented Triton wheel package, subsequently transferred to a D-Max. Check clearance and coverage on narrow-body work trims.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

Torque is omitted as a single number. Mitsubishi's 2013 handbook specifies 118–137 Nm for aluminium wheels and 137–157 Nm for steel wheels; follow the applicable wheel and nut specification.
Original alloy wheels use flange nuts, while replacement steel wheels can require tapered nuts. Thread size alone does not establish compatibility.
This guide is for Australian six-stud ML/MN models. Some overseas low-ride L200/Triton models have five studs.
Large tyres need a check at full lock and full compression; a suspension lift alone does not eliminate rubbing.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Triton / L200. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the ML GLX narrow steel package front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Questions

What is the Australian ML/MN Triton bolt pattern?

It is 6x139.7 with a 67.1 mm centre bore and M12x1.5 nuts.

What is the standard MN Triton wheel offset?

Common 16- and 17-inch alloy packages use ET38. The ML narrow 16x6 steel package uses ET46.

Can Prado wheels fit an ML or MN Triton?

Some owners use 16x7 ET26 Prado 90 wheels with 265/75 R16 tyres. The larger hub bore, nut seats, brake clearance and arch coverage still need checking.

What size tyres does the Mitsubishi Triton / L200 4th gen (ML/MN, Australia) have?

Factory tyre (tire) sizes for the 2006–2015 Mitsubishi Triton / L200 4th gen (ML/MN, Australia) are 205 R16, 245/70 R16 and 245/65 R17, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Mitsubishi Triton / L200 4th gen (ML/MN, Australia) use?

Factory wheels are 16 × 6 inch, 16 × 7 inch, 17 × 7 inch and 17 × 7.5 inch, depending on trim. The stock table lists the offset for each.

What is the Mitsubishi Triton / L200 4th gen (ML/MN, Australia) centre bore?

67.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Mitsubishi or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.