18-inch road setup
- Front and rear
- 18 × 8 inch, ET45 · 235/40 R18
Common N-cars forum sizing. Confirm brake and strut clearance for the exact wheel and model year.
2017–present · hatchback / fastback
Hyundai i30 N PDe wheel fitment
The i30 N uses square factory wheel and tyre sizes. Owners often choose 18-inch wheels for more sidewall or wider 19-inch wheels to bring the tyres closer to the arches.
5x114.3 bolt pattern · 67.1 mm centre bore · Stock wheels: 18 × 7.5, 19 × 8 inch · Stock tyres: 225/40 R18, 235/35 R19
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 67.1 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | Confirm in your handbook |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| N 250 PS | Front and rear | 18 × 7.5 inch, ET53 | 225/40 R18 |
| N Performance 275 PS / facelift 280 PS | Front and rear | 19 × 8 inch, ET55 | 235/35 R19 |
Explained in our guides
Read these before choosing wheels for the i30 N: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
19-inch flush road setup
- Front and rear
- 19 × 8.5 inch, ET45 · 235/35 R19
Documented Dotz Misano setup on standard suspension. Owners warn that lowering and wider-running tyres can reduce arch clearance.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Published torque references give 107–127 Nm, with service-style precision of 107.9–127.5 Nm. The scalar torque field is omitted to preserve that range; check the handbook for the car.
- Facelift Performance brakes must be checked against the wheel manufacturer's template before downsizing.
- ET45 does not guarantee clearance at every width. Lowering, tyre shoulder shape and alignment affect arch contact.
- Availability and end-of-sale dates vary by market; this guide concerns PDe N models, not ordinary i30 N Line models.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the i30 N. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the N 250 PS front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the i30 N bolt pattern?
5x114.3 with a 67.1 mm centre bore and M12x1.5 nuts.
Can I fit 18-inch wheels to an i30 N Performance?
There are documented 18-inch setups. Choose a wheel with confirmed clearance for your pre-facelift or facelift brakes.
Will 19x8.5 ET45 wheels fit an i30 N?
Owners document this size with 235/35 R19 tyres on standard suspension. Lowered cars need extra checks at the arch lip.
What size tyres does the Hyundai i30 N PDe have?
Factory tyre (tire) sizes for the 2017–present Hyundai i30 N PDe are 225/40 R18 and 235/35 R19, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Hyundai i30 N PDe use?
Factory wheels are 18 × 7.5 inch and 19 × 8 inch, depending on trim. The stock table lists the offset for each.
What is the Hyundai i30 N PDe centre bore?
67.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- Hyundai i30 N factory specifications
- TireWheelGuide i30 N dimensions and hardware
- Bolidenforum i30 N technical data
- N-cars wheel nut thread
- N-cars wheel torque discussion
- N-cars 19-inch installed examples
- N-cars 18-inch installed examples
- N-cars tyre and lowering caveats
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Hyundai or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.