16-inch road comfort
- Front and rear
- 16 × 7 inch, ET40 · 205/45 R16
Owners document this combination on Slipstream wheels. Brake clearance depends on the wheel design; confirm it before downsizing.
2013–2017 · hatchback
Ford Fiesta ST Mk7 wheel fitment
The Mk7 Fiesta ST has a four-stud hub and a factory 17-inch square setup. Owners often use 16-inch wheels for more tyre sidewall or wider 17-inch wheels for road and track driving.
4x108 bolt pattern · 63.3 mm centre bore · Stock wheels: 17 × 7 inch · Stock tyres: 205/40 R17
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 63.3 mm |
| Fastener and thread | Wheel nut, M12x1.5 |
| Tightening torque | 135 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| ST, ST-2 and ST-3, 17-inch | Front and rear | 17 × 7 inch, ET47.5 | 205/40 R17 |
Explained in our guides
Read these before choosing wheels for the Fiesta ST: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
17-inch wider daily
- Front and rear
- 17 × 8 inch, ET40 · 215/40 R17
A documented owner combination with a slightly wider tyre. Check arch and strut clearance on lowered cars and with wider-running tyre models.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Ford lists the hub bore as 63.3 mm in the ST supplement; aftermarket catalogues commonly call it 63.4 mm. The manufacturer value is recorded here. Order an ST-specific application rather than choosing a centring ring from the rounded number alone.
- Ford specifies M12x1.5 nuts tightened to 135 Nm. Match the nut seat to the wheel.
- The Mk8 ST uses different factory tyre profiles and offsets; its packages should not be treated as the Mk7 specification.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Fiesta ST. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the ST, ST-2 and ST-3, 17-inch front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the Mk7 Fiesta ST bolt pattern?
It is 4x108 with M12x1.5 wheel nuts.
Can I fit 16-inch wheels to a Fiesta ST?
Yes, with a brake-clearing design. Owners document 16x7 ET40 wheels with 205/45 R16 tyres.
What is the Fiesta ST wheel-nut torque?
Ford specifies 135 Nm. The original ST supplement also lists the M12x1.5 thread.
What size tyres does the Ford Fiesta ST Mk7 have?
Factory tyre (tire) sizes for the 2013–2017 Ford Fiesta ST Mk7 are 205/40 R17, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the Ford Fiesta ST Mk7 use?
Factory wheels are 17 × 7 inch, depending on trim. The stock table lists the offset for each.
What is the Ford Fiesta ST Mk7 centre bore?
63.3 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- Ford Fiesta ST supplement, factory wheels and fasteners
- Fiesta ST Forum hardware cross-check
- Superforma Fiesta ST hub specification
- Owner 16-inch Slipstream fitment
- Owner 17x8 ET40 fitment
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Ford or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.