18-inch lowered daily
- Front and rear
- 18 × 8 inch, ET45 · 225/40 R18
A facelift vRS owner documents Protrack ONE wheels with Michelin Pilot Sport 5 tyres and H&R springs in this combination.
2013–2020 · liftback and estate
The Mk3 Octavia vRS uses square factory wheel packages. Eighteen-inch wheels are common for daily use, while rear clearance deserves particular attention on facelift cars with the wider rear track.
5x112 bolt pattern · 57.1 mm centre bore · Stock wheels: 18 × 7.5, 19 × 7.5 inch · Stock tyres: 225/40 R18, 225/35 R19
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 57.1 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 120 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| vRS, 18-inch Gemini package | Front and rear | 18 × 7.5 inch, ET51 | 225/40 R18 |
| vRS, 19-inch Xtreme package | Front and rear | 19 × 7.5 inch, ET51 | 225/35 R19 |
Read these before choosing wheels for the Octavia vRS: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
A facelift vRS owner documents Protrack ONE wheels with Michelin Pilot Sport 5 tyres and H&R springs in this combination.
LFI records this size on a 2018 Octavia RS and lists this tyre size for the package. Check rear arch clearance on facelift cars and the approved rim-width range of the chosen tyre.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the Octavia vRS. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the vRS, 18-inch Gemini package front size. Choose your own trim or axle in the calculator if it differs.
It is 5x112 with a 57.1 mm centre bore and M14x1.5 bolts.
The factory combination is 225/35 R19 on 19x7.5 ET51 wheels.
An owner documents that size with 225/40 R18 tyres and H&R springs. Confirm the wheel design clears the brakes.
The facelift vRS has a wider rear track, so the same wheel sits further out relative to the rear arch.
Factory wheels are 18 × 7.5 inch and 19 × 7.5 inch, depending on trim. The stock table lists the offset for each.
57.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
120 Nm (about 89 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Skoda or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.