18-inch approved aftermarket
- Front and rear
- 18 × 7 inch, ET47 · 215/40 R18
Shown by Brock on an Ibiza FR (KJ) with ECE/ABE approval and a vehicle certificate. Sits 4 mm further out than the factory 18-inch wheel, with no spacers or lowering listed.
2017–present · hatchback
SEAT Ibiza 6F (KJ) wheel fitment
The 6F Ibiza moved to the MQB A0 platform shared with the current Polo, and the FR is the trim most owners build on. It keeps a 5x100 hub, so 18-inch wheels from the wider VW group small-car range are an easy OEM+ route. Most changes are about filling the arches with an 18-inch wheel and a small drop rather than going very wide.
5x100 bolt pattern · 57.1 mm centre bore · Stock wheels: 16 × 6.5, 17 × 7, 18 × 7 inch · Stock tyres: 195/55 R16, 215/45 R17, 215/40 R18
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 57.1 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 120 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| 16-inch alloy option, mid-spec versions | Front and rear | 16 × 6.5 inch, ET47 | 195/55 R16 |
| FR, 17-inch | Front and rear | 17 × 7 inch, ET51 | 215/45 R17 |
| FR / FR Sport, 18-inch option | Front and rear | 18 × 7 inch, ET51 | 215/40 R18 |
Explained in our guides
Read these before choosing wheels for the Ibiza: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
OEM+ Polo GTI 18-inch swap
- Front and rear
- 18 × 7.5 inch, ET51 · 215/40 R18
The Polo GTI (AW) 18-inch Faro wheel is 7.5Jx18 ET51 on 5x100, and the Polo AW shares the Ibiza's platform and 57.1 mm bore. It is half an inch wider than the Ibiza FR wheel at the same offset, so it sits slightly further out and further in. Keep the factory 215/40 R18 tyre size and confirm approval for the Ibiza with the supplier.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- The 6F keeps the 5x100 pattern and 57.1 mm bore of earlier Ibizas, but factory offsets are higher (ET51 on FR wheels versus ET43 on the 6J). Older Ibiza wheels will sit further out.
- Factory fixings are M14x1.5 wheel bolts. Match the seat type and thread length to the wheel; aftermarket wheels often need different bolts.
- Use 120 Nm for the wheel bolts, the figure given across Ibiza generations.
- Aftermarket wheels with a larger bore need 57.1 mm spigot rings.
- For winter or second sets, the 17-inch FR size (7Jx17 ET51, 215/45 R17) is the simplest choice because it matches a factory package.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Ibiza. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the 16-inch alloy option, mid-spec versions front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the bolt pattern of the SEAT Ibiza 6F?
5x100 with a 57.1 mm centre bore, using M14x1.5 wheel bolts tightened to 120 Nm.
What size are the Ibiza FR 18-inch wheels?
7Jx18 ET51 with 215/40 R18 tyres. The 17-inch FR wheel is 7Jx17 ET51 with 215/45 R17.
Do 6J Ibiza wheels fit the 6F?
They share 5x100 and 57.1 mm, so they bolt on. Most 6J wheels are ET43, which pushes them about 8 mm further out than 6F FR wheels, so check arch clearance and that the wheel is approved for your car.
Will Polo GTI wheels fit an Ibiza FR?
The current Polo GTI 18-inch Faro wheel is 7.5Jx18 ET51 on 5x100 with the same 57.1 mm bore, so it bolts on. It is slightly wider than the Ibiza FR wheel; run it on the factory 215/40 R18 tyre size and confirm approval for your car.
What size tyres does the SEAT Ibiza 6F (KJ) have?
Factory tyre (tire) sizes for the 2017–present SEAT Ibiza 6F (KJ) are 195/55 R16, 215/45 R17 and 215/40 R18, depending on trim. Your tyre placard shows the size for your car.
What wheel size does the SEAT Ibiza 6F (KJ) use?
Factory wheels are 16 × 6.5 inch, 17 × 7 inch and 18 × 7 inch, depending on trim. The stock table lists the offset for each.
What is the SEAT Ibiza 6F (KJ) centre bore?
57.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
What is the SEAT Ibiza 6F (KJ) wheel bolt torque?
120 Nm (about 89 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.
Specs checked against
- Wheel-Size: 2019 Ibiza factory sizes
- Wheel-Size: Ibiza Mk5 (6F/KJ1) facelift
- Avtoreference: 2019 Ibiza PCD, bore and thread
- DragTimes listing: Ibiza FR Sport 6F 18-inch wheel 6F0601025E, 7.0Jx18 ET51, 215/40ZR18
- Brock: Ibiza FR (KJ) with RC34 18-inch wheel
- TightTorque: Ibiza 5 (6F/KJ1) wheel bolt torque
- Pure Tyre: SEAT Ibiza wheel torque by year
- Partshaus: Polo AW GTI 18-inch Faro wheel 2G0601025AQ, 7.5J ET51 5x100
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from SEAT or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.