5 models and generations
SEAT and Cupra bolt pattern chart
Bolt pattern, centre bore, thread and torque for every SEAT and Cupra in our fitment guides, with the factory tyre sizes. Open a model for offsets, popular setups and clearance notes.
SEAT and Cupra wheel specs by model
| Model | Years | Bolt pattern | Centre bore | Thread | Torque |
|---|---|---|---|---|---|
| Formentor 1st gen (KM) | 2020–present | 5x112 | 57.1 mm | M14x1.5 bolt | 140 Nm (103 lb-ft) |
| Leon Mk4 (KL) | 2020–present | 5x112 | 57.1 mm | M14x1.5 bolt | 140 Nm (103 lb-ft) |
| Ibiza 6F (KJ) | 2017–present | 5x100 | 57.1 mm | M14x1.5 bolt | 120 Nm (89 lb-ft) |
| Ibiza 6J | 2008–2017 | 5x100 | 57.1 mm | M14x1.5 bolt | 120 Nm (89 lb-ft) |
| Leon Cupra Mk3 / 5F | 2014–2020 | 5x112 | 57.1 mm | M14x1.5 bolt | 120 Nm (89 lb-ft) |
Patterns and threads can change mid-generation or by market. Check your exact car in its guide before ordering wheels or fasteners.
SEAT and Cupra factory wheel and tyre sizes
| Model | Stock wheels (inch) | Stock tyres |
|---|---|---|
| Formentor 1st gen (KM) | 18 × 8, 19 × 8, 20 × 8.5 | 245/45 R18, 245/40 R19, 255/35 R20 |
| Leon Mk4 (KL) | 17 × 7.5, 18 × 7.5, 19 × 8 | 225/45 R17, 225/40 R18, 235/35 R19 |
| Ibiza 6F (KJ) | 16 × 6.5, 17 × 7, 18 × 7 | 195/55 R16, 215/45 R17, 215/40 R18 |
| Ibiza 6J | 17 × 7 | 215/40 R17 |
| Leon Cupra Mk3 / 5F | 18 × 7.5, 19 × 8 | 225/40 R18, 235/35 R19 |
Questions
What bolt pattern does SEAT and Cupra use?
It depends on the model. 5x112 is the most common in our guides (3 of 5), followed by 5x100. Look up the exact generation in the chart.
Do all SEAT and Cupra wheels fit all SEAT and Cupra cars?
No. Even with the same bolt pattern, centre bore, offset, width, brake clearance and fastener seat differ between models. Compare both cars' guides before swapping wheels.
What is the wheel torque for SEAT and Cupra?
Between 120 and 140 Nm (89 to 103 lb-ft) across the models in our guides. Use the figure for your exact car and confirm it in the handbook.
What lug bolt size does SEAT and Cupra use?
The threads in our SEAT and Cupra guides are M14x1.5. Seat type (conical, ball or flat) matters as much as the thread; check it against your wheels.