2009–2016 · saloon and estate

Mercedes-Benz E63 AMG W212 / S212 wheel fitment

The W212 E63 is a big V8 saloon and estate that owners tend to keep subtle, so most wheel changes are 19 or 20-inch staggered sets that fill the arches without much poke. Early cars are rear-drive, while the 2014-on S 4MATIC is all-wheel drive, which matters when choosing tyre sizes.

5x112 bolt pattern · 66.6 mm centre bore · Stock wheels: 18 × 9, 18 × 9.5, 19 × 9, 19 × 9.5 inch · Stock tyres: 255/40 R18, 285/35 R18, 255/35 R19, 285/30 R19

Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs

Quick specs

Mercedes-Benz E63 AMG W212 / S212 hub and fastener specifications
SpecificationValue
Bolt pattern
Stock tyre sizes
Centre bore66.6 mm
Fastener and threadWheel bolt, M14x1.5
Tightening torque130 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
TrimAxleWheelTyre
E63 AMG, 18-inchFront18 × 9 inch, ET37255/40 R18
E63 AMG, 18-inchRear18 × 9.5 inch, ET52285/35 R18
E63 AMG and E63 AMG S 4MATIC, 19-inchFront19 × 9 inch, ET37255/35 R19
E63 AMG and E63 AMG S 4MATIC, 19-inchRear19 × 9.5 inch, ET52285/30 R19

Read these before choosing wheels for the E63 AMG: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

20-inch staggered on KW springs

Front
20 × 9 inch, ET35 · 265/30 R20
Rear
20 × 10 inch, ET42 · 295/25 R20

Vorsteiner VFF-103 setup posted on MBWorld on a car with KW height-adjustable springs. The owner reports no rubbing.

20-inch aggressive at standard height

Front
20 × 9 inch, ET25 · 245/30 R20
Rear
20 × 10 inch, ET45 · 305/25 R20

Rohana RF2 set on an E63 S at standard ride height. The owner reports no rubbing on any suspension setting. On a 4MATIC car, check the front and rear rolling circumferences stay matched.

19-inch wide rear

Front
19 × 9 inch, ET30 · 265/30 R19
Rear
19 × 10.5 inch, ET50 · 305/30 R19

Avant Garde F411 setup run at standard height on a rear-drive E63. The tyre sizes give different rolling diameters front to rear, so this suits the rear-drive car rather than the 4MATIC.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

  • Mercedes specifies 130 Nm for the W212 wheel bolts in the owner's manual. Factory bolts have a ball seat; aftermarket wheels usually need conical-seat bolts.
  • W218 CLS63 wheels (19x10 ET47 rear) sat about half an inch out and rubbed on a standard-height W212 E63, according to an MBWorld owner.
  • An E63 S on H&R springs with the factory 19s plus 10 mm front and 13 mm rear spacers rubbed at low-speed full lock and over dips.
  • Mercedes notes snow chains are not permitted on the staggered E63 rear tyre sizes.
  • The 2014-on E63 AMG S 4MATIC needs matched front and rear rolling circumferences. Keep to the factory size pairing or a pairing with the same overall diameters.
  • Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the E63 AMG. Try the wheels, colour and stance before you spend on parts.

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

Questions

What is the W212 E63 AMG bolt pattern?

5x112 with a 66.6 mm centre bore and M14x1.5 bolts. The manual torque is 130 Nm.

What size are the factory W212 E63 wheels?

The 18-inch set is 9x18 ET37 front and 9.5x18 ET52 rear. The 19-inch set is 9x19 ET37 front and 9.5x19 ET52 rear.

What tyres does the E63 AMG W212 take?

255/40 R18 front and 285/35 R18 rear on 18s, or 255/35 R19 front and 285/30 R19 rear on 19s.

Will CLS63 wheels fit a W212 E63?

The W218 CLS63 19x10 ET47 rear wheel was reported to stick out and rub on a standard-height W212 E63. It is not a straight swap.

What wheel size does the Mercedes-Benz E63 AMG W212 / S212 use?

Factory wheels are 18 × 9 inch, 18 × 9.5 inch, 19 × 9 inch and 19 × 9.5 inch, depending on trim. The stock table lists the offset for each.

What is the Mercedes-Benz E63 AMG W212 / S212 centre bore?

66.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

What is the Mercedes-Benz E63 AMG W212 / S212 wheel bolt torque?

130 Nm (about 96 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.

Specs checked against

Related cars