19-inch lowered road coupé
- Front
- 19 × 8.5 inch, ET47 · 235/35 R19
- Rear
- 19 × 9.5 inch, ET45 · 255/30 R19
ModBargains documents HRE FF15 wheels with H&R Sport springs on a C63 coupé. Check clearance on other body styles.
2008–2014 · saloon, estate and coupé
The W204 C63 uses staggered wheels and needs enough spoke clearance for its front brakes. Coupé fitment examples are useful starting points, but should not be assumed to clear the arches of every body style.
5x112 bolt pattern · 66.6 mm centre bore · Stock wheels: 18 × 8, 18 × 9, 19 × 8, 19 × 9 inch · Stock tyres: 235/40 R18, 255/35 R18, 235/35 R19, 255/30 R19
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.6 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 130 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| C63 AMG, standard 18-inch | Front | 18 × 8 inch, ET45 | 235/40 R18 |
| C63 AMG, standard 18-inch | Rear | 18 × 9 inch, ET54 | 255/35 R18 |
| C63 AMG, optional 19-inch | Front | 19 × 8 inch, ET45 | 235/35 R19 |
| C63 AMG, optional 19-inch | Rear | 19 × 9 inch, ET54 | 255/30 R19 |
Read these before choosing wheels for the C63 AMG: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
ModBargains documents HRE FF15 wheels with H&R Sport springs on a C63 coupé. Check clearance on other body styles.
Threepiece documents HRE RC103 wheels on a stock-suspension C63 coupé, without spacers or reported rubbing. This is a specific car and wheel example.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the C63 AMG. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the C63 AMG, standard 18-inch front size. Choose your own trim or axle in the calculator if it differs.
It is 5x112 with a nominal 66.6 mm centre bore and M14x1.5 wheel bolts.
The 18-inch package uses 235/40 R18 front and 255/35 R18 rear. The optional 19-inch package uses 235/35 R19 and 255/30 R19.
A documented coupé uses 19x10 ET51 rear wheels with 275/30 R19 tyres on standard suspension. Confirm body, tyre and wheel design before using that example.
Factory wheels are 18 × 8 inch, 18 × 9 inch, 19 × 8 inch and 19 × 9 inch, depending on trim. The stock table lists the offset for each.
66.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
130 Nm (about 96 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Mercedes-Benz or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.