18-inch forged road and track
- Front and rear
- 18 × 8 inch, ET48 · 235/40 R18
BBS lists the RI-A030 in this size for the W176 A45. It retains the original dimensions; BBS labels it a tuner fitment, so obtain wheel-specific clearance confirmation.
2013–2018 · hatchback
The W176 A45 uses the same wheel and tyre size on both axles. Factory 18-inch and 19-inch packages provide useful reference points, while the front brake calipers restrict aftermarket wheel choice.
5x112 bolt pattern · 66.6 mm centre bore · Stock wheels: 18 × 8, 19 × 8 inch · Stock tyres: 235/40 R18, 235/35 R19
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.6 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 130 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| A45 AMG, standard 18-inch | Front and rear | 18 × 8 inch, ET48 | 235/40 R18 |
| A45 AMG, optional 19-inch | Front and rear | 19 × 8 inch, ET48 | 235/35 R19 |
Read these before choosing wheels for the A45 AMG: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
BBS lists the RI-A030 in this size for the W176 A45. It retains the original dimensions; BBS labels it a tuner fitment, so obtain wheel-specific clearance confirmation.
Schmidt lists its Drago in this combination for the A45. Check the approval conditions, ride height and arch clearance for the actual car.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the A45 AMG. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the A45 AMG, standard 18-inch front size. Choose your own trim or axle in the calculator if it differs.
It is 5x112 with a nominal 66.6 mm bore and M14x1.5 bolts.
The listed factory W176 A45 packages are square, with the same wheel and tyre sizes front and rear.
The factory 19x8 ET48 package uses 235/35 R19 tyres.
Factory wheels are 18 × 8 inch and 19 × 8 inch, depending on trim. The stock table lists the offset for each.
66.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
130 Nm (about 96 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Mercedes-Benz or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.