2013–2019 · four-door coupé and Shooting Brake
The first CLA45 shares its 4MATIC hardware with the W176 A45 and runs a square setup, so the same size goes on all four corners. Most owners either add modest spacers to the factory wheels or fit 19x8.5 wheels at an offset close to the factory ET48.
5x112 bolt pattern · 66.6 mm centre bore · Stock wheels: 18 × 8, 19 × 8 inch · Stock tyres: 235/40 R18, 235/35 R19
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.6 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 130 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| CLA45 AMG, 18-inch | Front and rear | 18 × 8 inch, ET48 | 235/40 R18 |
| CLA45 AMG, 19-inch | Front and rear | 19 × 8 inch, ET48 | 235/35 R19 |
Read these before choosing wheels for the CLA45: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Listed by an HRE retailer as the C117 CLA45 application for the FF10 wheel. An MBWorld owner also runs 19x8.5 Vorsteiner VFF101 wheels with 245/35 R19 tyres and reports no rubbing (offset not stated).
Flush-fit spacer kits for the C117 CLA45 use 12.5 mm front and rear (effective ET35.5) with longer bolts, sold for standard suspension or H&R and Eibach springs.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the CLA45. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the CLA45 AMG, 18-inch front size. Choose your own trim or axle in the calculator if it differs.
5x112 with a 66.6 mm centre bore, M14x1.5 bolts and 130 Nm torque.
8x18 ET48 with 235/40 R18 tyres, or 8x19 ET48 with 235/35 R19 tyres, the same size on all four corners.
19x8.5 is the usual choice. HRE lists 19x8.5 ET47 with 235/35 R19 tyres for the C117 CLA45, close to the factory ET48 position but a little wider.
The factory 19-inch AMG wheel (8x19 ET48, part A1764010502) is listed for both the W176 A45 and the C117 CLA45.
Factory tyre (tire) sizes for the 2013–2019 Mercedes-AMG CLA45 C117 / X117 are 235/40 R18 and 235/35 R19, depending on trim. Your tyre placard shows the size for your car.
66.6 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
130 Nm (about 96 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Mercedes-AMG or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.