The G35 Coupe has staggered factory tyres, with several different 17, 18 and 19-inch wheel packages. Wider staggered wheels are common on lowered road cars, but the early Brembo brake option needs particular attention to spoke clearance.
A documented coupe runs Stance LX coilovers, roughly two degrees of negative camber and rolled arches all round, without spacers.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
The 2004 owner manual and later coupe service specifications give 108 Nm for wheel nuts; the owner forum corroborates 80 lb ft. Check the exact manual when servicing an early 2003 car.
Early six-speed Brembo cars need a brake-compatible wheel face. Later non-Brembo clearance claims do not establish fitment on those cars.
The factory 18-inch wheels are equal width, but the tyres are staggered. Do not treat that package as a square tyre setup.
These dimensions are for the V35 coupe. Sedan wheel widths and offsets should not be substituted.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the G35 Coupe. Try the wheels, colour and stance before you spend on parts.
5x114.3, with a 66.1 mm centre bore and M12x1.25 wheel nuts.
Are G35 Coupe factory wheels staggered?+
The 17 and 19-inch packages use different front and rear widths. The 18-inch package is 8J at both ends, but still has wider rear tyres.
Will all 19-inch wheels clear G35 Brembos?+
No. The spoke profile and barrel must suit the early Brembo calipers, even when the diameter is large enough.
Do wide 20-inch wheels need arch work?+
The documented 20-inch setup here uses rolled arches, coilovers and negative camber. It should not be presented as a direct fit on an unmodified car.
What size tyres does the Infiniti G35 Coupe V35 have?+
Factory tyre (tire) sizes for the 2003–2007 Infiniti G35 Coupe V35 are 225/50 R17, 235/50 R17, 225/45 R18, 245/45 R18, 225/40 R19 and 245/40 R19, depending on trim, with wider rears on staggered setups. Your tyre placard shows the size for your car.
What wheel size does the Infiniti G35 Coupe V35 use?+
Factory wheels are 17 × 7.5 inch, 17 × 8 inch, 18 × 8 inch, 19 × 8 inch and 19 × 8.5 inch, depending on trim. The stock table lists the offset for each.
What is the Infiniti G35 Coupe V35 centre bore?+
66.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
What is the Infiniti G35 Coupe V35 wheel nut torque?+
108 Nm (about 80 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Infiniti or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.