2014–2018 · pickup

Chevrolet Silverado 1500 3rd gen (K2XX) wheel fitment

The 2014–2018 Silverado 1500 left the factory on 17, 18, 20 or 22-inch wheels, all on the same six-stud hub. Most owners either fit a levelling kit and slightly taller tyres on the factory 20s, or go to 17 or 18-inch wheels with all-terrains for a lifted look.

6x139.7 bolt pattern · 78.1 mm centre bore · Stock wheels: 17 × 8, 18 × 8.5, 20 × 9, 22 × 9 inch · Stock tyres: 255/70 R17, 265/70 R17, 265/65 R18, 275/55 R20, 285/45 R22

Updated 2026-10-31 · Medium source confidence. Check your exact trim and market. How we check specs

Quick specs

Chevrolet Silverado 1500 3rd gen (K2XX) hub and fastener specifications
SpecificationValue
Bolt pattern
Stock tyre sizes
Centre bore78.1 mm
Fastener and threadWheel nut, M14x1.5
Tightening torque190 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
TrimAxleWheelTyre
WT / LS, 17-inchFront and rear17 × 8 inch, ET24255/70 R17
17-inch, 265/70 R17 optionFront and rear17 × 8 inch, ET24265/70 R17
LT, 18-inchFront and rear18 × 8.5 inch, ET24265/65 R18
LTZ / High Country, 20-inchFront and rear20 × 9 inch, ET27275/55 R20
High Country, optional 22-inchFront and rear22 × 9 inch, ET24285/45 R22

Read these before choosing wheels for the Silverado 1500: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

Levelled, factory 20-inch wheels

Front and rear
20 × 9 inch, ET27 · 285/55 R20

RealTruck's K2XX tyre guide lists 285/55 R20 on the factory 20-inch wheel with a 2-inch levelling kit. Check the upper control arm and liner at full lock.

Levelled, factory 17-inch wheels

Front and rear
17 × 8 inch, ET24 · 285/70 R17

RealTruck lists 285/70 R17 on the factory 17s once the front is levelled by 2 inches. This tyre is about 6% taller than the WT's 255/70 R17, so the speedometer will read low.

3.5-inch lift on 18x9 wheels

Front and rear
18 × 9 inch, ET18 · 285/65 R18

RealTruck lists 285/65 R18 on 18x9 wheels at ET0 to ET20 for 2014–2018 trucks with a 3.5-inch lift; this entry uses ET18. Follow the lift maker's wheel requirements.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

  • All 2014–2018 Silverado 1500s use 6x139.7 with a 78.1 mm centre bore and M14x1.5 studs, so factory wheels from this generation and the 2019-on T1 trucks share the same mounting dimensions. Check brake clearance and the nut seat before swapping.
  • Sources disagree on some factory offsets. Two fitment databases give ET24 for the 17-inch wheel and ET27 for the 20-inch, while an OEM wheel supplier lists ET28 and ET24. Read the offset stamped on your wheel if it matters.
  • Levelling kits change the front ride height only. Taller or wider tyres on factory-offset wheels can touch the upper control arm, so check at full lock before driving far.
  • GM's figure is 140 lb ft, about 190 Nm.
  • Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Silverado 1500. Try the wheels, colour and stance before you spend on parts.

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the WT / LS, 17-inch front size. Choose your own trim or axle in the calculator if it differs.

Questions

What is the bolt pattern of a 2014–2018 Silverado 1500?

6x139.7, with a 78.1 mm centre bore and M14x1.5 wheel nuts torqued to about 190 Nm.

Do 2019-on Silverado wheels fit a 2014–2018 truck?

They share the bolt pattern, bore and stud thread, so they mount, but check the offset, the brake clearance and the tyre size against your truck.

What tyre size fits the factory 20s with a levelling kit?

RealTruck lists 285/55 R20 on the factory 20x9 wheel with a 2-inch level. Check the upper control arm and liner at full lock.

What wheels does a 2014–2018 Silverado LT have?

The LT came on 18x8.5 ET24 wheels with 265/65 R18 tyres. Work Truck and LS models had 17x8 wheels, and LTZ and High Country had 20x9.

What wheel size does the Chevrolet Silverado 1500 3rd gen (K2XX) use?

Factory wheels are 17 × 8 inch, 18 × 8.5 inch, 20 × 9 inch and 22 × 9 inch, depending on trim. The stock table lists the offset for each.

What is the Chevrolet Silverado 1500 3rd gen (K2XX) centre bore?

78.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

What is the Chevrolet Silverado 1500 3rd gen (K2XX) wheel nut torque?

190 Nm (about 140 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars