2019–present · estate

Audi RS6 Avant C8 wheel fitment

The C8 RS6 uses wide square wheel packages rather than wider rear wheels. Owners commonly choose 21s for more sidewall or lower-offset 22s, with brake and dust-shield clearance checked for the specific wheel.

5x112 bolt pattern · 66.5 mm centre bore · Stock wheels: 21 × 10.5, 22 × 10.5 inch · Stock tyres: 275/35 R21, 285/30 R22

Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs

Quick specs

Audi RS6 Avant C8 hub and fastener specifications
SpecificationValue
Bolt pattern
Stock tyre sizes
Centre bore66.5 mm
Fastener and threadWheel bolt, M14x1.5
Tightening torque120 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
TrimAxleWheelTyre
RS6, 21-inch factory packageFront and rear21 × 10.5 inch, ET19275/35 R21
RS6 / Performance, 22-inch factory packageFront and rear22 × 10.5 inch, ET19285/30 R22

Read these before choosing wheels for the RS6 Avant: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

21-inch road setup

Front and rear
21 × 10.5 inch, ET15 · 275/35 R21

Atomic Wheels lists this C8 RS6-specific size with the factory 21-inch tyre size. Confirm the chosen wheel against steel or carbon-ceramic brakes and the dust shields.

22-inch lower-offset street setup

Front
22 × 10.5 inch, ET7 · 285/30 R22
Rear
22 × 10.5 inch, ET4 · 285/30 R22

Element Wheels documents Vossen HF5 wheels at standard height with no rubbing or body modifications reported. The rear wheel is ET4; this example is wheel-specific.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

  • Factory wheels use ball-seat bolts. Match the bolt seat and length to the replacement wheel; a matching thread alone is not sufficient.
  • The nominal hub is 66.5 mm; some wheel suppliers describe the corresponding bore as 66.6 mm. Obtain the wheel manufacturer's C8 RS6 application confirmation.
  • A wheel that fits a C7 RS6 or RS7 is not automatically clear of the C8 brake dust shields.
  • Check the exact brake package, wheel load rating and tyre load rating. Diameter and width alone are insufficient for this car.
  • The standard 21 and 22-inch packages use the same tyre sizes front and rear. The different offsets in the Vossen example do not call for different tyre sizes.
  • Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the RS6 Avant. Try the wheels, colour and stance before you spend on parts.

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the RS6, 21-inch factory package front size. Choose your own trim or axle in the calculator if it differs.

Questions

What is the Audi RS6 C8 bolt pattern?

5x112, with a nominal 66.5 mm hub and M14x1.5 bolts.

Can I put 21-inch wheels on a C8 RS6?

Yes. Audi offered 21x10.5 ET19 wheels with 275/35 R21 tyres. An aftermarket 21-inch wheel still needs C8 brake and dust-shield clearance.

Does the C8 RS6 have staggered factory wheels?

No. Its main 21 and 22-inch factory packages are square, with identical wheels and tyres on both axles.

What is the C8 RS6 wheel bolt torque?

120 Nm for factory wheel bolts, consistent with Audi's A6-family workshop specification.

What size tyres does the Audi RS6 Avant C8 have?

Factory tyre (tire) sizes for the 2019–present Audi RS6 Avant C8 are 275/35 R21 and 285/30 R22, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Audi RS6 Avant C8 use?

Factory wheels are 21 × 10.5 inch and 22 × 10.5 inch, depending on trim. The stock table lists the offset for each.

What is the Audi RS6 Avant C8 centre bore?

66.5 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars