2012–2015 · estate
The B8 RS4 Avant has wider arches and bigger brakes than the A4 and S4, with factory wheels at a much lower offset. Owners mostly keep a 9J width and either fit the factory 20-inch option or add hub-centric spacers to fill the arches.
5x112 bolt pattern · 66.5 mm centre bore · Stock wheels: 19 × 9, 20 × 9 inch · Stock tyres: 265/35 R19, 265/30 R20
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 66.5 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 120 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| RS4 Avant, standard 19-inch package | Front and rear | 19 × 9 inch, ET24 | 265/35 R19 |
| RS4 Avant, optional 20-inch package | Front and rear | 20 × 9 inch, ET26 | 265/30 R20 |
Read these before choosing wheels for the RS4 Avant: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
A common upgrade from the standard 19s is the optional 20x9 ET26 wheel, which sellers also list as fitting the B8 RS5. As a factory size it bolts on without spacers or hub rings. RS246 owners note that 265/30 R20 tyres, especially winters, come in fewer options than the 19-inch size.
RS246 owners recommend 10 mm hub-centric spacers front and rear on a standard-height car for a flusher look, giving an effective ET14. Needs longer wheel bolts. Hub-centric spacers in smaller sizes are hard to find for this hub.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the RS4 Avant. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the RS4 Avant, standard 19-inch package front size. Choose your own trim or axle in the calculator if it differs.
5x112 with a 66.5 mm centre bore and M14x1.5 wheel bolts, torqued to 120 Nm.
The standard wheel is 19x9 ET24 with 265/35 R19 tyres. The optional 20-inch wheel is 20x9 ET26 with 265/30 R20.
They bolt on, but they are not the same fitment. The A4 and S4 use much higher offsets and narrower wheels, and their brake clearance is not proven against the RS4's larger brakes.
10 mm hub-centric spacers front and rear are the common recommendation on a standard-height car. Use longer bolts to suit.
Factory tyre (tire) sizes for the 2012–2015 Audi RS4 Avant B8 are 265/35 R19 and 265/30 R20, depending on trim. Your tyre placard shows the size for your car.
Factory wheels are 19 × 9 inch and 20 × 9 inch, depending on trim. The stock table lists the offset for each.
66.5 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
120 Nm (about 89 lb-ft) for the original bolts. Confirm in your handbook, especially with aftermarket wheels or bolts.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Audi or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.