19-inch vs 20-inch rims · tyre size comparison
325/30 R19 vs 335/25 R20
335/25 R20 is 2.1 mm (0.08 in) shorter than 325/30 R19, a -0.31% difference in overall diameter. That is well inside the ±3% limit commonly used to screen a tire size change; it is a nominal calculation, not a fitment approval.
- Diameter difference
- -2.1 mm
- -0.08 in · -0.31%
- Indicated 70 mph
- 69.8 mph
- Actual speed on 335/25 R20, if the speedometer was accurate on 325/30 R19.
- Sidewall height
- -13.75 mm
- 97.5 mm to 83.75 mm.
Dimensions side by side
| Measurement | 325/30 R19 | 335/25 R20 | Difference |
|---|---|---|---|
| Overall diameter | 677.6 mm26.68 in | 675.5 mm26.59 in | -2.1 mm (-0.31%)-0.08 in |
| Section width | 325 mm12.8 in | 335 mm13.19 in | +10 mm+0.39 in |
| Sidewall height | 97.5 mm3.84 in | 83.75 mm3.3 in | -13.75 mm-0.54 in |
| Circumference | 2,128.74 mm83.81 in | 2,122.15 mm83.55 in | -6.6 mm-0.26 in |
| Rim diameter | 482.6 mm19 in | 508 mm20 in | +25.4 mm+1 in |
| Revolutions per mile | 756.01 | 758.36 | +2.35 |
| Revolutions per km | 469.76 | 471.22 | +1.46 |
Calculated from the nominal size codes, without load or tread wear. Real tyres vary by model, rim width and pressure, so the exact tyre's published dimensions take priority.
Speedometer with 335/25 R20
If the speedometer was accurate on 325/30 R19, fitting 335/25 R20 means the car is travelling 0.31% slower than it shows, and the odometer over-records distance by about the same amount.
| Speedometer shows | Actual on 335/25 R20 | Difference |
|---|---|---|
| 30 mph | 29.91 mph | -0.09 mph |
| 50 mph | 49.85 mph | -0.15 mph |
| 60 mph | 59.81 mph | -0.19 mph |
| 70 mph | 69.78 mph | -0.22 mph |
| 50 km/h | 49.85 km/h | -0.15 km/h |
| 100 km/h | 99.69 km/h | -0.31 km/h |
UN ECE Regulation 39, used in the UK and EU, does not allow a speedometer to show less than the true speed, so many read slightly high from the factory. A shorter tyre adds to it. Calibration varies by car; these figures are the tyre-size effect only.
What changes from 325/30 R19 to 335/25 R20
Wheels
These sizes need different wheels: 19-inch for 325/30 R19 and 20-inch for 335/25 R20. The larger wheel usually weighs a little more; the smaller one must still clear the brake calipers. Check rim width, offset and load rating for whichever wheel you fit.
Sidewall and ride comfort
335/25 R20 has 13.75 mm less sidewall (83.75 vs 97.5 mm). A shorter sidewall usually sharpens steering response, but rides a little firmer and leaves the rim more exposed to potholes and kerbs.
Contact width
335/25 R20 is 10 mm wider in nominal section width (3.1%). A wider tyre usually puts a wider, shorter contact patch on the road, which can help dry grip, but it may follow ruts more, clear standing water less readily and add some rolling resistance.
Wheel well clearance
Ride height changes by about -1 mm, and the top of the tyre moves the same distance away from the arch. On the same wheel width and offset, each sidewall moves about 5 mm further out towards the arch lip and further in towards the suspension. Check clearance at full steering lock and full suspension compression, especially on a lowered car.
Gearing
Effective gearing changes by +0.31%, too little to notice from the driver's seat.
ABS, stability control and AWD
These systems compare wheel speeds. Fit the same size on both ends of an axle, and follow the car maker's rolling-circumference limits, which can be much tighter than 3%.
General tendencies from the nominal numbers, not a test of any tyre. Load index, speed rating, tyre construction and the car's approved sizes matter more than these rules of thumb.
Explained in our guides
- Plus-sizing wheels: tyre diameter and speedometer changesWork through a 17 to 18 inch wheel change, compare tyre diameters and speedometer effects, and understand why a 3% rule cannot approve fitment.
- Staggered vs square wheels: tyres, rotation and AWDCompare square and staggered wheel setups, calculate front-to-rear tyre diameter, and understand rotation limits and all-wheel-drive requirements.
- How to read a tyre size, load index and sidewall markingsDecode tyre width, aspect ratio, rim diameter, load and speed markings, then calculate sidewall height and diameter using a 225/45 R17 example.
Cars in our guides using these sizes
Factory trims and popular community setups from our fitment guides. A popular setup is not a factory approval; each guide explains its trims, axles and clearance limits.
325/30 R19
- Chevrolet Camaro 6th gen (2016–2024)Factory trim
- Chevrolet Corvette C7 (2014–2019)Popular setup
- Porsche 911 997 (2004–2012)Popular setup
335/25 R20
- Chevrolet Corvette C7 (2014–2019)Factory and popular setup
More comparisons
325/30 R19 compared
Questions
Can I use 335/25 R20 instead of 325/30 R19?
Only on 20-inch wheels, not the 19-inch wheels that take 325/30 R19. The diameter difference is -0.31%, well inside the ±3% screening limit. That does not approve fitment: check the car maker's approved sizes, load index, speed rating, rim width and clearance first.
How much bigger is 335/25 R20 than 325/30 R19?
Overall diameter is 2.1 mm (0.08 in) smaller: 675.5 vs 677.6 mm. Section width is 10 mm wider, and the sidewall is 13.75 mm shorter. These are nominal figures; real tyres vary by model and rim width.
Will 335/25 R20 change my speedometer reading?
Yes, by 0.31%. If the speedometer was accurate on 325/30 R19, an indicated 60 mph would be about 59.8 mph on 335/25 R20, and an indicated 100 km/h about 99.7 km/h. You would be going slower than the speedometer shows.
Which is better, 325/30 R19 or 335/25 R20?
Neither in general. 325/30 R19 has the taller sidewall, which usually rides more comfortably; 335/25 R20 usually steers more sharply. 335/25 R20 is wider, which can help dry grip; the narrower size is usually better in standing water and snow. The size listed for your car's trim, on its placard or in the handbook, is the safe default.
Check the exact tyre
Size codes give nominal dimensions. Before buying, confirm the size is approved for your car and check the exact tyre's load and speed ratings and published dimensions.