22-inch rim · dimensions and fitment reference

265/35 R22 tyre size

265/35 R22 has a nominal diameter of 744.3 mm (29.3 inches) and a 92.75 mm sidewall. Check the dimensions, car-guide matches and neighbouring rim-size alternatives below.

Compare 265/35 R22 in the calculatorCars and trimsPlus and minus sizesCompared withOther 30 inch tyres

265/35 R22 dimensions

Nominal dimensions of 265/35 R22
MeasurementMillimetresInches
Overall diameter744.329.3
Sidewall height92.753.65
Section width26510.43
Circumference2,338.2992.06
Rim diameter558.822
Revolutions per kilometre
427.66
Revolutions per mile
688.26

Calculated from the nominal size, without load or tread wear. Revolutions use nominal circumference, not a measured rolling circumference. Tyre model, inflation, load and rim width can change the real dimensions.

Reading the size

265 is the nominal section width in millimetres, not tread width. 35 is the sidewall height as a percentage of that width. R means radial construction, and 22 is the rim diameter in inches. For the load index, speed rating and date code that follow the size, read how to read a tyre size.

Rim-width starting range

8.5 to 9.5 inches

Our passenger-car guidance estimates a 9-inch measuring rim and a half-inch band either side. This is a starting estimate, not an approved rim-width range. The exact tyre manufacturer's published range takes priority. Our guide to choosing wheel width for a tyre explains how to find the approved range.

Explore tyre and rim width

Plus-size and minus-size alternatives

Computed candidates within ±3% of the 744.3 mm diameter, on 21-inch and 23-inch rims. Width stays within 20 mm of this tyre, using 165 to 355 mm widths in 10 mm steps and 25 to 80% profiles in 5% steps. These combinations are not a stock list or fitment approval; check availability and the exact tyre specification.

Minus one: 21-inch rims

265/35 R22 alternatives on 21-inch rims
Candidate sizeDiameterChangeCompare
265/40 R21745.4 mm+0.15%Compare sizes
255/40 R21737.4 mm-0.93%Compare sizes
275/40 R21753.4 mm+1.22%Compare sizes
245/45 R21753.9 mm+1.29%Compare sizes
285/35 R21732.9 mm-1.53%Compare sizes
245/40 R21729.4 mm-2%Compare sizes
285/40 R21761.4 mm+2.3%Compare sizes
275/35 R21725.9 mm-2.47%Compare sizes
255/45 R21762.9 mm+2.5%Compare sizes

Plus one: 23-inch rims

265/35 R22 alternatives on 23-inch rims
Candidate sizeDiameterChangeCompare
265/30 R23743.2 mm-0.15%Compare sizes
275/30 R23749.2 mm+0.66%Compare sizes
255/30 R23737.2 mm-0.95%Compare sizes
285/30 R23755.2 mm+1.46%Compare sizes
245/35 R23755.7 mm+1.53%Compare sizes
245/30 R23731.2 mm-1.76%Compare sizes
285/25 R23726.7 mm-2.36%Compare sizes
255/35 R23762.7 mm+2.47%Compare sizes

How a size change moves the speedometer and gearing is covered in plus-sizing wheels. A smaller rim must still clear the brakes. Check wheel width, offset, load and speed ratings, full steering and suspension travel, and vehicle restrictions. AWD and staggered cars may need a much tighter rolling-circumference match than this screening limit.

Cars and setups listing 265/35 R22

Use the trim, market and axle as well as the car name. Each guide links to its supporting sources and explains clearance limits.

Factory trims

Stock uses of 265/35 R22
CarTrimAxle
Tesla Model X 1st gen (2015–2026)2016–2020, 22-inch TurbineFront
Tesla Model X 1st gen (2015–2026)2021-on Long Range / Plaid, 22-inch TurbineFront

Popular community setups

Popular setup uses of 265/35 R22
CarSetupAxle
Ford Mustang Mach-E 1st gen (2021–present)22x9.5 ET44 with 265/35 R22Front and rear
Tesla Model X 1st gen (2015–2026)22-inch staggered forged setFront

265/35 R22 compared with

Sizes people often weigh against 265/35 R22, with the full dimension, speedometer and gearing comparison on each page. The percentage is the change in overall diameter from 265/35 R22.

All tyre size comparisons

Questions

How tall is a 265/35 R22 tyre?

Its nominal overall diameter is 744.3 mm (29.3 inches). Sidewall height is 92.75 mm. These are size-code calculations; actual dimensions vary by tyre model, rim and operating conditions.

What rim width should I use for 265/35 R22?

Our starting estimate is 8.5 to 9.5 inches, around a 9-inch measuring rim. This is not a manufacturer-approved range. Check the exact tyre model's published rim widths before fitting.

Can I replace 265/35 R22 with one of the alternatives?

The alternatives only match nominal diameter within 3% on a rim one inch smaller or larger. That does not approve fitment. Confirm that the size is manufactured, then check load and speed ratings, rim width, brakes, bodywork clearance, vehicle approval and any AWD requirements.

Which cars use 265/35 R22?

2 car guides list this size. The tables separate factory trims from community setups and identify the axle. A popular setup is not a factory tyre approval.

Check the exact tyre

For how measured dimensions and approved rim ranges differ from nominal calculations, see Tire Rack’s tyre specification guide.