18-inch road and camper package
- Front and rear
- 18 × 8.5 inch, ET45 · 255/45 R18
A retailer-supplied KV4 package using 103Y XL tyres. Check the wheel certificate and plated axle loads, especially on a T32 or converted camper.
2015–2024 · van
The T6 and T6.1 are commonly fitted with larger alloys for road use or camper conversions. Wheel and tyre load ratings matter as much as size, particularly on T32 vans and heavily equipped campers.
5x120 bolt pattern · 65.1 mm centre bore · Stock wheels: 16 × 6.5, 17 × 7, 18 × 8 inch · Stock tyres: 215/65 R16C, 235/55 R17, 215/60 R17C, 255/45 R18
Updated 2026-10-04 · Medium source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 65.1 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 180 Nm (confirm in your handbook) |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| Startline steel / Highline Clayton, 16-inch package | Front and rear | 16 × 6.5 inch, ET51 | 215/65 R16C |
| Devonport 17-inch package, passenger tyre option | Front and rear | 17 × 7 inch, ET55 | 235/55 R17 |
| Devonport 17-inch package, commercial tyre option | Front and rear | 17 × 7 inch, ET55 | 215/60 R17C |
| Palmerston optional 18-inch package | Front and rear | 18 × 8 inch, ET50 | 255/45 R18 |
Read these before choosing wheels for the Transporter: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
A retailer-supplied KV4 package using 103Y XL tyres. Check the wheel certificate and plated axle loads, especially on a T32 or converted camper.
Vanstyle supplies this with 106 XL tyres. Its Calibre Exile-R wheel is rated at 815 kg and explicitly excludes T32 vans. Check clearance if lowered and verify the individual axle loads.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the Transporter. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the Startline steel / Highline Clayton, 16-inch package front size. Choose your own trim or axle in the calculator if it differs.
T6 and T6.1 use 5x120 with a 65.1 mm centre bore and M14x1.5 wheel bolts.
The factory installation uses 180 Nm. An aftermarket wheel and fitting kit must follow their own approved instructions.
No. The wheel and tyre must both meet the plated axle loads. The 815 kg Calibre Exile-R example in this guide is explicitly unsuitable for T32.
The documented 17x7 ET55 packages include 235/55 R17 and 215/60 R17C. Use the load and speed ratings approved for the individual van.
Factory wheels are 16 × 6.5 inch, 17 × 7 inch and 18 × 8 inch, depending on trim. The stock table lists the offset for each.
65.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Volkswagen or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.