18-inch road setup
- Front and rear
- 18 × 8.5 inch, ET43 · 235/40 R18
Apex lists this as a road fitment for the Mk8 R. Use a wheel design specifically cleared for its front brakes.
2021–present · hatchback / estate
Volkswagen Golf R Mk8 wheel fitment
The Mk8 Golf R is often moved to 18-inch wheels to gain tyre sidewall. Its front brake package makes barrel and spoke clearance a key part of that change.
5x112 bolt pattern · 57.1 mm centre bore · Stock wheels: 18 × 7.5, 19 × 8 inch · Stock tyres: 225/40 R18, 235/35 R19
Updated 2026-10-04 · High source confidence. Check your exact trim and market. How we check specs
Quick specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 57.1 mm |
| Fastener and thread | Wheel bolt, M14x1.5 |
| Tightening torque | 140 Nm (confirm in your handbook) |
Stock wheels and tyres
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| R, 18-inch Jerez package, selected markets | Front and rear | 18 × 7.5 inch, ET51 | 225/40 R18 |
| R, 19-inch Estoril / Adelaide package | Front and rear | 19 × 8 inch, ET50 | 235/35 R19 |
| R facelift, optional 19-inch Warmenau package | Front and rear | 19 × 8 inch, ET50 | 235/35 R19 |
Explained in our guides
Read these before choosing wheels for the Golf R: they explain the offset, fitment and hub numbers in this guide.
- Wheel offset explained: choosing ET without guessingUnderstand positive and negative wheel offset, calculate inner clearance and outer position, and choose an ET using measurements from your own car.
- Flush, poke and tucked fitment: measure the whole tyreUnderstand flush, poked and tucked wheels, calculate how width and offset change the look, and check clearance beyond a parked side-on photograph.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
Popular community setups
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Wider 18-inch setup
- Front and rear
- 18 × 9 inch, ET42 · 245/40 R18
Documented Apex road and track option. Check front liner clearance at full lock, particularly on lowered suspension.
18-inch track tyres
- Front and rear
- 18 × 9 inch, ET42 · 255/35 R18
Apex track fitment. Additional negative camber and front arch screw modification may be required with wide tyres.
Width and offset guidance
Offset range
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Common width limit
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Clearance notes
- Factory wheels use ball-seat bolts. Match the bolt seat and length to the replacement wheel; a matching thread alone is not sufficient.
- A larger aftermarket centre bore needs correctly sized hub rings; a smaller bore will not seat on the hub.
- The Mk8 Golf manual specifies 140 Nm, corroborated by ECS and Volkswagen CD wheel approval. Do not reuse the Mk7 figure of 120 Nm.
- The R front brakes restrict smaller wheels. An 18-inch wheel must still have the correct barrel and spoke profile.
- Use the same tyre size and model on both axles for the square setups shown.
- Factory package availability changes with market and model year. Jerez, Estoril, Adelaide and Warmenau wheels should be identified by part number.
- Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.
See it on your car.
Upload a photo and start with a look that suits the Golf R. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
Run the numbers
These tools start with the R, 18-inch Jerez package, selected markets front size. Choose your own trim or axle in the calculator if it differs.
Questions
What is the bolt pattern of the Mk8 Golf R?
5x112, with a 57.1 mm centre bore and M14x1.5 wheel bolts.
Will 18-inch wheels fit a Mk8 Golf R?
Yes. VW offered the 18-inch Jerez package in selected markets. Aftermarket 18s still need explicit clearance for the R brakes.
What is the Mk8 Golf R wheel bolt torque?
140 Nm for factory wheel bolts, as specified in the Golf manual.
What tyres can I use on 18x9 wheels?
Apex documents 245/40 R18 and 255/35 R18. The latter can require camber and arch screw work, depending on the tyre and suspension.
What wheel size does the Volkswagen Golf R Mk8 use?
Factory wheels are 18 × 7.5 inch and 19 × 8 inch, depending on trim. The stock table lists the offset for each.
What is the Volkswagen Golf R Mk8 centre bore?
57.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
Specs checked against
- Weds: Volkswagen hub, PCD and bolt application chart
- Volkswagen Golf owner manual: 140 Nm wheel bolt torque
- ECS Tuning: Mk8 GTI and Golf R installation guide, wheel torque
- Volkswagen accessory wheel approval: Golf AU and CD fastening specifications
- Volkswagen: Golf performance models wheel packages
- Alloy Hub: genuine Jerez 5H0601025Q dimensions
- Apex: Mk8 Golf R fitment guide
- Volkswagen: facelift Golf R Warmenau wheel and tyre package
- Original Felgen: Warmenau 5H0601025AJ dimensions
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
Related cars
More guides from Volkswagen or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.