2001–2006 · coupe

Honda Integra / Acura RSX DC5 wheel fitment

The DC5 was sold as the Honda Integra in Japan and Europe and as the Acura RSX in North America, all on 5x114.3. The RSX Type-S came on 17x7 ET45 and the Japanese Type R on high-offset 17s, and owners usually move to 17 or 18-inch wheels around 8.5 to 9 inches wide at a lower offset to fill the arches.

5x114.3 bolt pattern · 64.1 mm centre bore · Stock wheels: 17 × 7, 16 × 6.5, 15 × 6 inch · Stock tyres: 215/45 R17, 205/55 R16, 195/65 R15

Updated 2026-10-31 · Medium source confidence. Check your exact trim and market. How we check specs

Quick specs

Honda Integra / Acura RSX DC5 hub and fastener specifications
Specification	Value
Bolt pattern	5x114.3
Stock tyre sizes	215/45 R17 205/55 R16 195/65 R15
Centre bore	64.1 mm
Fastener and thread	Wheel nut, M12x1.5
Tightening torque	108 Nm (confirm in your handbook)

Stock wheels and tyres

Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.

Factory wheels and tyres by trim and axle
Trim	Axle	Wheel	Tyre
Acura RSX Type-S (2002–2006), 17-inch	Front and rear	17 × 7 inch, ET45	215/45 R17
Acura RSX base, 16-inch	Front and rear	16 × 6.5 inch, ET45	205/55 R16
Honda Integra Type R (Japan), 17-inch	Front and rear	17 × 7 inch, ET60	215/45 R17
Honda Integra base (Japan), 15-inch	Front and rear	15 × 6 inch, ET45	195/65 R15

Explained in our guides

Read these before choosing wheels for the Integra / Acura RSX: they explain the offset, fitment and hub numbers in this guide.

Popular community setups

Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.

18x8.5 OEM-plus on lowering springs

Front and rear: 18 × 8.5 inch, ET30 · 225/40 R18

Threepiece's RSX guide features a Type-S on lowering springs with Work CR-Kiwami 18x8.5 ET30 and 225/40 R18 all round, with no arch rolling and no rubbing.

Width and offset guidance

Offset range

Check the exact setup

There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.

Common width limit

Measure before ordering

A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.

These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.

Clearance notes

Threepiece suggests 17 or 18-inch wheels 8 to 9.5 inches wide at ET25 to ET40 for an OEM-plus look, with 17x9 or 18x9 around ET30 sitting flush.
17x9 ET22 pokes at the front. A Type-S featured by Threepiece on 17x9 ET22 with 255/40 R17 and coilovers has rolled arches and extra front camber; another car on 17x9 ET22 at standard height is advised to use camber bolts.
A base RSX on coilovers with 18x9.5 ET38 and 255/35 R18 needed rolled arches and still rubs slightly at full lock.
Japanese Type R wheels are ET60, about 15 mm further inboard than the RSX's ET45 wheels. One forum poster lists them as 17x7.5 rather than 17x7, so check the stamping on a used set.
The hub is 64.1 mm and the studs are M12x1.5. Use wheel nuts with the seat type the new wheel needs.
Check full steering lock and suspension travel with the car loaded. Match wheel load rating, tyre load and speed ratings, fastener seats and brake clearance.

See it on your car.

Upload a photo and start with a look that suits the Integra / Acura RSX. Try the wheels, colour and stance before you spend on parts.

See it on your car

An AI preview shows the look. It cannot verify physical fitment.

Run the numbers

These tools start with the Acura RSX Type-S (2002–2006), 17-inch front size. Choose your own trim or axle in the calculator if it differs.

Compare tyre sizes Compare wheel offsets Check tyre and rim width Find the same bolt pattern Convert offset to backspacing

Questions

What is the DC5 Integra and RSX bolt pattern?

5x114.3 with a 64.1 mm hub bore and M12x1.5 wheel nuts, tightened to 108 Nm (80 lb-ft).

What size are the factory RSX Type-S wheels?

17x7 ET45 with 215/45 R17 tyres. The base RSX has 16x6.5 ET45 with 205/55 R16.

Will Japanese DC5 Type R wheels fit an RSX?

Yes, they share the 5x114.3 pattern. At ET60 they sit about 15 mm further inboard than the RSX Type-S wheels.

Can I fit 18-inch wheels to an RSX without rolling the arches?

Yes at a moderate size. A Type-S on lowering springs runs 18x8.5 ET30 with 225/40 R18 with no rolling or rubbing. Wider 9.5-inch wheels on coilovers have needed rolled arches.

What size tyres does the Honda Integra / Acura RSX DC5 have?

Factory tyre (tire) sizes for the 2001–2006 Honda Integra / Acura RSX DC5 are 215/45 R17, 205/55 R16 and 195/65 R15, depending on trim. Your tyre placard shows the size for your car.

What wheel size does the Honda Integra / Acura RSX DC5 use?

Factory wheels are 17 × 7 inch, 16 × 6.5 inch and 15 × 6 inch, depending on trim. The stock table lists the offset for each.

What is the Honda Integra / Acura RSX DC5 centre bore?

64.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.

What is the Honda Integra / Acura RSX DC5 wheel nut torque?

108 Nm (about 80 lb-ft) for the original nuts. Confirm in your handbook, especially with aftermarket wheels or nuts.

Specs checked against

This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.

Related cars

More guides from Honda or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.