2018–present · 3-door SUV
The fourth-generation Jimny comes as the 660cc JB64 kei car in Japan and as the 1.5-litre JB74, sold as the Jimny Sierra in Japan and simply as the Jimny elsewhere, with flared arches and a wider track. Most owners want a slightly taller, chunkier all-terrain tyre without lifting the car, and the 215 width on 15 or 16-inch wheels is where most of them land.
5x139.7 bolt pattern · 108.1 mm centre bore · Stock wheels: 15 × 5.5, 16 × 5.5 inch · Stock tyres: 195/80 R15, 175/80 R16
Updated 2026-10-31 · High source confidence. Check your exact trim and market. How we check specs
| Specification | Value |
|---|---|
| Bolt pattern | |
| Stock tyre sizes | |
| Centre bore | 108.1 mm |
| Fastener and thread | Wheel nut, M12x1.25 |
| Tightening torque | Confirm in your handbook |
Factory options vary by trim and market. Match your car to the row below and check its tyre placard before using it as a baseline.
| Trim | Axle | Wheel | Tyre |
|---|---|---|---|
| JB74 Jimny / Jimny Sierra 1.5, 15-inch alloy | Front and rear | 15 × 5.5 inch, ET5 | 195/80 R15 |
| JB64 Jimny 660 turbo (Japan), 16-inch | Front and rear | 16 × 5.5 inch, ET22 | 175/80 R16 |
Read these before choosing wheels for the Jimny: they explain the offset, fitment and hub numbers in this guide.
Starting points for a build. Read the notes with each setup, especially if your car is lowered or has different brakes.
Owners of 2019 and 2020 JB74s on the Big Jimny forum report fitting 215/75 R15 all-terrain and mud tyres straight onto the original 5.5-inch alloys, and say it works fine despite being the widest size usually suggested for that rim.
The usual 16-inch aftermarket size for the JB74. JimnyStyle lists 215/70 R16 on its 16x6 ET-5 wheels as needing no modification, and Big Jimny forum members point newcomers to the same size for a standard-height JB74. Treat this as a JB74 fitment.
A wider, deeper-dish look. One fourth-generation owner on the Big Jimny forum posted photos of his car on 7x15 ET-14 wheels with BFGoodrich 215/75 R15 tyres. This sits well outside the factory wheel, so check how far the tyre stands proud of the arch for your local rules.
The common taller tyre for the kei JB64. The Japanese magazine Motor-Fan describes 185/85 R16 as fitting a standard or slightly lifted JB64, adding about 15 mm of height but little width. These are light-truck based tyres, so they are heavier and ride firmer than the factory 175/80 R16.
Check the exact setup
There is no confirmed range for this car yet. Compare a known wheel with your proposed size and measure both sides.
Measure before ordering
A maximum width has not been confirmed. Tyre shape, ride height and alignment all change the available space.
These figures belong to the setups described here. Combining the widest wheel with either end of the offset range does not guarantee a safe fit. For how ET moves the wheel in and out, read wheel offset explained; for how far the tyre can sit out, see flush, poke and tucked fitment.
Upload a photo and start with a look that suits the Jimny. Try the wheels, colour and stance before you spend on parts.
An AI preview shows the look. It cannot verify physical fitment.
These tools start with the JB74 Jimny / Jimny Sierra 1.5, 15-inch alloy front size. Choose your own trim or axle in the calculator if it differs.
5x139.7, with a 108.1 mm centre bore and M12x1.25 wheel nuts. JB64 and JB74 are the same.
215/75 R15 on the factory alloys and 215/70 R16 on 16-inch wheels are the sizes owners and specialists report fitting without a lift or trimming. 225/70 R16 and 225/75 R16 usually need the bumper trimmed.
They bolt on, but the JB74's wheels are low-offset (ET5 on the factory 15s) to suit its wider arches. On the narrower JB64 they sit further out than its own ET22 16-inch wheels.
16x5.5 ET22 with 175/80 R16 tyres. The JB74 comes on 15x5.5 ET5 with 195/80 R15.
Factory tyre (tire) sizes for the 2018–present Suzuki Jimny JB64/JB74 (4th gen) are 195/80 R15 and 175/80 R16, depending on trim. Your tyre placard shows the size for your car.
Factory wheels are 15 × 5.5 inch and 16 × 5.5 inch, depending on trim. The stock table lists the offset for each.
108.1 mm. Aftermarket wheels with a larger bore need hub-centric rings sized to it.
This guide is a starting point, not a fitment guarantee. Specs can differ by market, trim and previous modifications. Confirm all sizes, clearances and fastener requirements with a qualified wheel and tyre professional before buying or fitting parts.
More guides from Suzuki or cars with the same bolt pattern. A matching pattern alone does not make a wheel interchangeable.