2 car guides · 5 fasteners
5x110 bolt pattern
5x110 places 5 fastener centres evenly around a 110 mm pitch circle. Use the car list below to check the hub and thread details that the bolt pattern alone cannot tell you.
The stud circle explained
5 is the number of wheel nuts or bolts. 110 is the pitch circle diameter in millimetres, equivalent to 4.331 inches.
On an odd-stud pattern there is no directly opposite fastener. The distance between two fasteners is not the PCD; use a suitable PCD gauge or the confirmed vehicle specification.
Count and measure the actual hubs on a converted car. A nearby PCD is a different pattern. How to measure a bolt pattern shows the method, including five-stud hubs.
Cars in our guides with 5x110
Grouped by make. Values come from each linked guide and its sources. Where a generation has more than one pattern, confirm the trim and market in the guide.
Vauxhall / Opel
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Vauxhall / Opel Astra VXR / Astra OPC H (2005–2010) | 65.1 mm | M12x1.5 · bolt | Listed generation; check exact trim |
Vauxhall
| Car and years | Centre bore | Fastener thread | Pattern coverage |
|---|---|---|---|
| Vauxhall Corsa VXR D (2007–2014) | 65.1 mm | M12x1.5 · bolt | Listed generation; check exact trim |
Centre bores and hub-centric rings
The recorded centre bore is 65.1 mm. These figures describe the cars in our guides, not every 5x110 wheel or vehicle.
If the wheel maker specifies a centring ring, its outside diameter must match the wheel bore and its inside diameter must match your hub. A larger wheel bore may accept a suitable ring; a wheel bore smaller than the hub will not be made to fit by adding one. Confirm ring shape, depth and suitability with the wheel supplier. Our guide to hub-centric rings covers when you need them.
Explained in our guides
- How to measure a wheel bolt pattern, including five studsMeasure wheel PCD correctly on four, five, six and eight stud patterns, avoid near-match mistakes, and check the other dimensions before a wheel swap.
- Hub-centric vs lug-centric wheels: choosing hub ringsLearn what hub rings do, how to specify their inner and outer diameters, and why centring, wheel seats and vibration need separate checks.
- Wheel spacers: safety checks and how to choose a sizeCalculate spacer effects on offset and track width, distinguish slip-on and bolt-on systems, and check hub engagement, fasteners and moving clearance.
Before sharing wheels between cars
Compare offset and width, the hub bore, nut or bolt seat, thread and engagement, wheel load rating, brake clearance and tyre clearance. Keep the correct fasteners and tightening specification for the actual car and wheel.
Questions
What does 5x110 mean?
It means 5 equally spaced fasteners on a circle 110 mm in diameter. PCD stands for pitch circle diameter. It measures the circle through the fastener centres, not the centre bore.
Which cars use 5x110?
Our guides include Vauxhall / Opel Astra VXR / Astra OPC H, Vauxhall Corsa VXR D. Check each guide for model-year, trim and market differences; this is not a complete list of all cars with this pattern.
Do all 5x110 wheels have the same centre bore?
The recorded centre bore is 65.1 mm. The bolt pattern does not specify the bore. Compare the exact wheel bore with your vehicle hub before ordering.
Can I swap wheels between cars with 5x110?
A matching pattern alone is not enough. Check wheel width and offset, centre bore, brake clearance, fastener thread and seat, load capacity and tyre clearance. A centring ring cannot correct a different bolt pattern or offset.
Reference notes
Vehicle figures are drawn from the linked fitment guides. For general fitting checks, see Tire Rack’s wheel fitment checks and Discount Tire’s hub ring guidance.